Error proofing creates significant benefits for both automated and manual assembly procedures, including increased quality and productivity. With new sensor technologies, assemblies can be validated and error-proofed automatically in-process rather than post-process. High-precision photoelectric sensors, dimensional gauging sensors, light screens, and camera-based technologies, as well as manual techniques can be applied to ensure critical product attributes.

Verifying that a critical part is in place and in the correct position before the next step in the process is a common requirement. Photoelectric sensors can easily achieve this objective. Two sensors can each form a convergent point a mere one-hundredth of an inch to accurately detect the edges of a product.

With sensing technology advancements in the last several years, users are now able to integrate cost-effective measuring capabilities into processes with resolution as high as 0.0001 inch. Parts can be automatically inspected for critical attributes prior to the next manufacturing step.

New long range sensors can look inside a machine or process where a shorter-range sensor will not fit or survive, or is intrusive to the process. Ranges are now available for inspecting at any distance from one to 164 ft with repeatable accuracy of 0.04 to 0.12 in. This capability opens up new inspection applications.

Many parts or assemblies cannot be inspected with traditional single-beam sensors. Often the user needs to determine if any one or more of several parts are in the proper position on an assembly. A light screen system can profile an entire assembly for missing or misplaced components.

Often, an entire product area must be inspected because the flaw could be anywhere in the defined area. Image sensors are designed to easily solve these applications with a camera that counts pixels and then compares the count to a predetermined reference count. An application example would be the sensor inspecting a plastic steering column component for irregularities in a flange area, and rejecting parts that register 80% or less white pixels, compared to a good part.

Accuracy of humans in sequential manual assembly is also a huge issue in error proofing. PLC-controlled "picking" systems use lights indicating which item to pick next, and a light screen in front of each bin to verify that the correct part has been taken. These systems increase quality percentages for assembly operations by reducing missed parts, and parts assembled in the wrong order. Along with error-proofing the assembly process, they also increase worker efficiency by verifying at all times where an assembler left off during the assembly process, even after a break or work-stoppage. This totally visual communication system is also a worldwide solution that eliminates training obstacles, such as language barriers, and technical ability.

In today's marketplace, it is not good enough to simply make parts. Manufacturers and customers demand high quality that is measurable and verifiable, for every part or assembly. Error proofing reduces the time spent on quality inspections and rework, in addition to lowering the reject and scrap percentages. This adds up to reduced manufacturing costs and higher plant profitability. Manufacturers are now able to optimize their production speeds and produce quality products faster than ever before.