Standard Profits: Make2Pack and ISA88
David Chappell is chair of the Make2Pack/ISA88 Part 5 standards development effort, with Complete Manufacturing Automation Associates - LLC, and retired Proctor & Gamble section manager for batch technologies. Help ISA88 committee members increase dialog about, completion of, interest in, and use of Make2Pack. Join in with your comments or questions to help the standard along, on your way to gaining competitive advantage, reducing overall costs by half. David A. Chappell, Make2Pack chair, and other ISA88 Part 5 committee members provide intelligence and specific links for this effort, spanning OMAC, WBF, and ISA standards efforts.
NOTE: ISA grants permission to post portions of the ISA88 (or other applicable standards) in this blog for comments and discussions and postings (or comments) from this blog may be used for ISA and related standards development.
ISA88 Part 1 markup: What will be removed from ISA88 Part 5 draft? April 22 call
Non-duplication: As ISA88 Part 1 work moves towards completion, it is time to decide what has been included in Part 1 and what can be removed from the Part 5 draft.
As the ISA88 Part 1 work moves towards completion, it is time to pick up the Part 5 draft and decide what has been included in Part 1 and what can be removed from Part 5. The “dS88-01Update20markupApr2010v2.doc” Part 1 document and the “ISA-88-05 WD05 Equipment Models-V04.doc” can be found here on the Make2Pack Blog for your review. Click the links above, review, and make some notes. (ISA is still in the process of rebuilding our list server for Part 5.)
Thanks, and I look forward to interesting discussions during our scheduled April 22, 09:00 AM EST call! (See prior posts for call-in instructions or contact me, below, with any comments or questions.)
Also see the following and leave any comments or suggestions using the comment function, below.
- 2010 calendar for ISA88 Make2Pack meetings;
- ISA88 Part 5: State Diagram as an example rather than a normative requirement;
- What exactly is the Automation Object that Make2Pack is trying to describe?
David A. Chappell
Complete Manufacturing Automation associates - LLC
8190 Paddington Ct
West Chester, OH 45069
Phone 513-779-1942 Fax 513-779-1952
Posted by David Chappell on April 14, 2010