Engineers’ Choice Awards: Frequently Asked Questions
Updated October 22, 2015
Q: Who can nominate products for the 2016 Engineers' Choice Awards program?
A: Manufacturers (or their representatives) of products released from November 2014 through October 2015 that were not previously nominated will be eligible for the 2015 Awards.
Q: How do I nominate a product?
A: Products are nominated using an online form. Detailed instructions and access to this form are available on the 2016 Engineers' Choice Awards nomination page: www.controleng.com/EngineersChoice
Q: What products should be nominated?
A: New or significantly modified hardware, software, and combination products introduced and available in North America between November 2014 and October 2015 that were not nominated for the 2015 program. Products must fall into one of the categories shown below, which may change, depending on entries received.
Machine and embedded control - CNCs, board-level products
Machine and embedded control - Discrete sensors
Machine and embedded control - Machine vision, barcode readers
Machine and embedded control - PACs
Machine and embedded control - PLCs
Motion control - Drives
Motion control - Servo drives
Network integration - Ethernet hardware
Network integration - I/O systems
Network integration - Network hardware
Network integration - Signal conditioning/diagnostics
Network integration - Wireless I/O
Network integration - Wireless products
Power - Energy, power protection
Power - Motor control center
Process control - Flowmeters
Process control - Process sensors
Process control systems
Safety - Machine safety
Safety - Process safety, intrinsic safety
Hardware - Handheld test, measurement, calibration
Hardware - HMI, operator interface, thin-client
Hardware - Industrial PCs
Hardware - Integrated HMI controllers
Software - Applications
Software - Control design
Software - Diagnostics
Software - HMI software
Software - Mobile apps for controls, automation, instrumentation
Q: What is the process for nominating, selecting and awarding the Engineers’ Choice Awards?
A: Until 5 p.m. CST on Friday, Aug. 7, 2015, we solicit entries for the 2016 competition via a combination of e-mail newsletters and direct outreach. Once all nominations are received, ballots are created. Ballots are sent to Control Engineering electronic mailing lists, based on Control Engineering print subscription demographics (see www.controleng.com/mediainfo) and include subscribers from our opt-in e-mail lists who indicated that they are responsible for or influence control/automation technology purchases. Votes are cast via an online form hosted by Control Engineering.
Q: How can I make the ballot as compelling as possible?
A: It is critical that the summary description and 300 word description be factually convincing, clearly differentiating benefits in the voting criteria: technological advancement, service to the industry, and market impact. We observe that engineers often appreciate quantified benefits more than adjectives.
Q: Should I include registration marks and trademarks with products in the description?
A: It is our magazine and website style to not include trademarks; instead please put the appropriate company name in front of each initial product mention to ensure appropriate attribution of all products and software.
Q: How do I know the entry form is complete?
A: Completing the entry form questions in a word-processing document is recommended, in case there’s an Internet disruption while completing the form. A complete entry form includes the form filled out truthfully and completely. (A payment page appears after the “Submit” button is clicked. You will also receive a confirmation e-mail with a PDF copy of your entry.)
Q: How should images be prepared?
A: It should be one image, high resolution, either submitted via the online form or emailed to apelliccione(at)cfemedia.com
- 300 dpi JPG at 3x4 in. named "CE-Company_Name-Product_Name-print.jpg"
Recommendation: If it’s software, often a screen shot close-up of a compelling software feature can be more convincing than image of a shrink-wrapped software box.
Q: Is there payment?
A: Yes, there is a processing fee for 2016 Engineers' Choice Award nominations. Please complete the payment process online, after completing the product submission form. The fee is $495.00 per product. (If payment isn't received, the entry will be void.)
Q: How many products compete for awards?
A: It depends on how many products are nominated. Typically, 85 to 120 are nominated, with 3 to 10 products per category. One winner from each subcategory is based on subscriber votes. Submitting more than one product per category may split the vote and decrease chances. For the 2015 awards, 94 products from 56 companies (or major divisions) were nominated in 26 categories, resulting in 26 Engineers’ Choice Awards to 20 companies, and 27 Honorable Mentions to 25 companies.
Q: What happens when my product is named a "Finalist"?
A: All Finalists are notified of their status via email from the Control Engineering team at least one month prior to the Finalist announcement on www.controleng.com. All Finalists get additional exposure through subscriber and reader voting. All Finalists receive a Finalist logo (EPS and JPG formats) and will be posted online at www.controleng.com. In October's monthly edition, enewsletters, and online, subscribers will be encouraged to review and vote on the Finalists. Leading vote-receivers among subscribers get an Engineers' Choice award; runner-ups get an Honorable Mention plaque; each receive an appropriate logo (EPS and JPG formats) to use in association with the product.
Q: Who is allowed to vote in the competition?
A: Voting is only open to qualified print and/or digital subscribers of Control Engineering brand products (i.e. magazine, e-newsletters, etc.). Only one vote per subscriber will be counted towards the final tally. Employees of product manufacturers with a finalist in the 2016 program and their properties, agencies, vendors, and representatives are not eligible to vote, hence any votes received from these parties will not be counted toward the final tally.
Q: How many individuals vote in the competition?
A: Again, it varies; for 2015, over 600 ballots were received and tallied.
Q: How long has Control Engineering been awarding technologies?
A: Control Engineering has previously called this competition the “Editor’s Choice” awards and had the editorial team select the most noteworthy products since 1987. In 2006, we decided to open up the balloting to those who had the most hands-on experience with the products: subscribers. The competition is now called the Engineers’ Choice Awards.
Q: Has numbering of the years changed?
A: Yes, the date sequence of the awards was changed in 2009 so that the award year reflects the year in which the awards are announced, rather than the year in which the products were introduced (as had been the practice). As such, there are no "2009" award recipients; those awards announced in February 2010 were the 2010 Engineers’ Choice Award winners.
Q: When will the winners be announced publicly?
A: For the 2016 Engineers' Choice program, once results are tallied, winning companies will be notified via e-mail in early January 2016. Results are embargoed until Feb. 15, 2016. After that date, the official logo for award winners can be included in advertising, newsletters, online media and other promotional items. The February 2016 monthly issue and newsletters will highlight winning technologies; links to all products remain on the awards page.
Q: What do winners receive?
A: Companies with winning products receive a crystal award for display purposes, as well as a unique awards logo that can be used on advertising and promotional materials. Winning-product descriptions and photographs appear in the Control Engineering February 2016 issue to North American subscribers. The cover story feature article about the winners is also digitized and promoted to the magazine’s newsletter subscribers and website visitors. Cross linking between www.controleng.com and company websites is encouraged.
Q: Is there an awards presentation?
A: Yes, there's an awards ceremony with photographer present as part of the Engineering Awards in Manufacturing dinner in March 2016; details are sent to the award winners in early February.
Q: Can I get an editorial quote from Control Engineering to include in a press release announcing the achievement?
A: Yes. Please contact Control Engineering’s Mark T. Hoske at mhoske(at)cfemedia.com for more information.
Q. Is there a sample press release to help draft an announcement for the 2015 Engineers' Choice Award winners? (Last year... this will be updated after winners for 2016 are notified.)
A: Yes. See text below.
If you have won a 2015 Control Engineering Engineers’ Choice Award and choose to distribute a release about your achievement, here’s information you may want to include in your release:
<Your product name> by <your company name> won a Control Engineering Engineers’ Choice Award, the publication announced on Feb. 12, 2015.
Control Engineering, part of CFE Media, awarded products in 26 categories of control, instrumentation, and automation products introduced in 2014, as chosen by print and online subscribers. This is the 28th year of product recognition for the publication, highlighted in the February 2015 monthly edition, in several newsletters and at www.controleng.com/awards.
"Innovative solutions such as <your winning product name here> make manufacturing and other control engineering applications more efficient through smart applications of new technologies. Investments in the best products and software can help solve the most pressing challenges in automation, control, and instrumentation," according to Mark T. Hoske, Control Engineering content manager.
<<< If you choose to link to your posted product at www.controleng.com, the URL is available at www.controleng.com/EngineersChoice. NOTE: The URL for your product will remain the same >>>
"Continuous improvements among leading technology providers ensure that manufacturers, machine builders, and automation system integrators can achieve the levels of agility, efficiency, and effectiveness necessary to compete—and win—in today’s global economy," Hoske said.
About the recognition
Nearly 100 product nominations from 56 companies were entered for consideration in the 2015 Engineers' Choice Awards. Control Engineering subscribers voted to identify the products they felt were the most exceptional based on technological advancement, service to the industry, and market impact. Engineers’ Choice Award winners and honorable mentions were named in 26 categories. Awards will be presented as part of the 2015 Engineering Awards in Manufacturing event held on March 23, 2015, in Chicago.
About Control Engineering
Control Engineering (www.controleng.com) is the leader in connecting the global industrial engineering audience through the coverage of and education about automation, control and instrumentation technologies in a regionally focused, actionable manner through online and print media and in-person events. Control Engineering, Consulting-Specifying Engineer, and Plant Engineering are part of CFE Media LLC, located in Oak Brook, IL. CFE stands for Content for Engineers (www.cfemedia.com).
If you require additional information not in this document, or if you have any questions or concerns, please contact Mark Hoske at mhoske(at)cfemedia.com or Amanda Pelliccione at firstname.lastname@example.org.
Return to the Control Engineering Engineers' Choice Award nomination page.