1Q12 UPS service revenues down 1% year-over-year

Revenues from the sale of UPS services in the first quarter of 2012 are roughly 1% less than in the same period last year.

06/21/2012


Revenues from the sale of uninterruptible power supply (UPS) services in the first quarter of 2012 are roughly one percent less than in the same period last year. IMS Research, recently acquired by IHS Inc., has been tracking quarterly changes in this market since 2009. Over the years, the first quarter has proven to be seasonally slow, but never has it shown negative growth year-over-year.

The UPS service market includes service contracts, warranties, installation, battery replacements and preventive maintenance on UPS hardware. Growth trends in the UPS service market closely follow those seen in the UPS hardware market, which, according to IMS Research’s UPS hardware tracker, slowed down in the fourth quarter of 2011 and slowed down further in the first quarter of 2012.

Service revenues tend to lag hardware revenues by roughly a year. For example, while UPS hardware revenue growth slowed in 2008, service revenues continued to grow strongly until 2009, when the service market finally felt the effects of decreased hardware sales. The lag is attributed to the nature of service contracts, which are typically attached to UPS 12-18 months after sale of the UPS itself. Given that contracts account for roughly half of the total market, the effect is significant.

UPS Service vs. UPS Hardware Revenue Growth. Source: IMS Research

The outlook for the global market may not be so dim given that much of the decline is confined to Europe, whose economy continues to struggle. The weakening of the Euro against the dollar inflated the decline year-over-year for that region, since revenues are aggregated in US dollars. The Americas has a slightly better picture with positive growth year-over-year in Q1. Asia showed the greatest percentage increase year-over-year of the three major regions, as tends to be the case with most markets for data center infrastructure that IMS Research tracks. Liz Cruz, the analyst for this market, suggests that “much of the explanation for the slow quarter can indeed be attributed to seasonality and that Q1 is the slowest quarter for services. However, if the UPS hardware market growth continues to slow, service revenues in 2012 may grow significantly less than in 2011, when they increased by 15 percent.” 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.