5 ways automation can streamline assembly operations

Bosch Rexroth offers 5 key ways to incorporate lean manufacturing principles into assembly operations – even for automated processes. Here's advice on how automation can help implement lean concepts.

05/23/2011


Bosch Rexroth Podcast Discusses “Lean in Assembly Operations”Lean manufacturing expert, Dan Fleming, worked with Bosch Rexroth to outline how automation can work with lean concepts to make assembly operations more efficient. Fleming, who is Continuous Improvement Manager of the Greater Boston Manufacturing Partnership (GBMP), stresses that although a common perception is that automation builds in waste and excess production, automation can actually streamline processes that are typical of a wasteful manual assembly line. Five key points of advice follow from Fleming.

1. Mistake-proofing, standardization and consistency, considered hallmarks of automation, also are important concepts of lean manufacturing.

2. Design engineers should consider lean principles when designing automated processes. For example, robots on an assembly line should exclude additional movements that are not an integral part of the actual task. By limiting wasteful movement, the robot could complete the task faster and the item would be assembled quicker, and the process becomes even leaner.

3. Countering the common assumption that automation is expensive, Fleming explains that simply improving or modifying processes on a large machine could achieve a significant reduction in changeover time. If changing tools is necessary, for example, by removing and then replacing four bolts, operators should question if the same task can be completed safely with two bolts. This cuts the time needed to attach the tool by 50 percent, and that savings may be amplified across multiple tools to save additional time.

4. According to Fleming, overproduction is the worst waste because it perpetuates even more waste: moving the extra product, storing it, counting it and paying tax on it. It’s more efficient to keep a big machine idle than produce things that are not needed. A lean alternative, says Fleming, would be to add multiple smaller machines so the assembly line is more flexible.

5. Fleming also recommends that a person working in an assembly line should have a standardized, stable work environment that is always equipped with the right tools in spaces that can be reached without having to look up, eliminating a waste of motion. By designing workstations that are ergonomically correct, the person does not have to waste time by “setting up” the workstation; everything is ready for the task to be completed immediately.

More information is available from Fleming in Rexroth’s lean manufacturing podcast episode 16, “Lean in Assembly Operations” discusses how to apply lean concepts to automation. The episode is the latest in a series of Rexroth podcasts dedicated to lean manufacturing education. The podcast series is also available from the iTunes podcast library and other podcast directories on the web. Related and supporting information is available.

For more information on lean manufacturing visit www.boschrexroth-us.com/lean

http://www.boschrexroth-us.com/leanwww.boschrexroth-us.com

Bosch Rexroth

- Edited by Gust Gianos, Control Engineering, www.controleng.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.