7 tips for an industrial Ethernet cyber security strategy

Industrial operations are becoming more aware of their vulnerability to cyber mischief or cyber attacks. Here are seven tips that can create the foundation for a cyber security strategy.

09/03/2010


 

Industrial operations are becoming more aware of their vulnerability to cyber mischief or cyber attacks. Internet protocol (IP) strategy allows organizations access to more and better data and cost-effective remote monitoring and control of facilities, but it requires thought to avoid malicious or accidental security incidents. Here are seven tips that can create the foundation for a cyber security strategy. 

1) Physical:  Cyber security starts with physical security.  If outsiders cannot gain access to the premises, it is harder for them to access sensitive data. 

2) Firewalls:  Protect cyber assets with firewalls at the cyber perimeters of your critical cyber assets just as you protect the physical perimeter.

3) Port access control:  In addition to denying access to the building, disallowing unauthorized devices to be plugged into ports on switches and routers makes for a more secure environment.

4) Password health and authentication:  Change passwords regularly – and make sure that they are long enough and complex enough that they are difficult to crack.  Then consider adding authentication.  More secure than simple authorization (which ensures the person accessing the system is using the right code), authentication ensures that the person or device requesting access is who he/it says he/it is.

5) Encryption:  Fiber cabling is much more secure than copper when used to relay data between secure locations.  Sending encrypted data adds an extra level of protection outside secure facilities.

6) VPNs and VLANs:  Virtual Private Networks and Virtual LANS both provide extra layers of security for transmissions over multi-purpose transport networks.

7) Employee training:  Security is only as good as the practices that are in place.  Employees, without meaning to create a security breach, can be lax with passwords, security codes and other primary measures unless they are educated – and reminded – about the importance of security.

- Peter Wood is vice president of operations for GarrettCom Inc. www.garrettcom.com.

Also read, from Control Engineering:

10 Control System Security Threats;

Securing Legacy Control Systems; and

Cyber security for control systems: More tips, warnings from INL

- Edited by Mark T. Hoske, Control Engineering, www.controleng.com.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.