A construction manager weighs in on engineering design

Lessons learned about design teams by those that have to make the design happen. Pass those lessons on.

09/25/2012


First of all, let me say the design engineer is the heartbeat of a project. He or she spends many hours at the customer’s site in rack room panels, field panels, on top of columns, on furnaces, turbines, reactors, hot, cold, etc. Communication with the design team is one of the keys to a successful project, and I do appreciate a good set of drawings!

All projects have lessons in them, if we’re open to recognizing them and willing to learn. If I or my colleagues learned something from a project, then we need to pass this information on to keep the same mistakes from happening again. Lessons learned during engineering design are usually not well documented because of the demanding pace and accuracy needed to produce quality drawings. Let’s face it, a project will likely take longer to complete if lessons learned are documented along the way, but it will make a similar design process easier and more efficient in the future. That will benefit the next designer and others that follow. As a construction manager, I can tell you that this is valuable information going into future projects. Lessons learned are discussed in weekly meetings on large projects. When construction completes their scope of work and the project moves towards completion, the design engineer’s lessons learned are just as vital as the red line and as-built drawings.

Because it is almost impossible to remember the day to day issues that arise in design activities, a daily journal is a helpful way to keep track. Look for lessons learned every day, talk to senior design engineers, talk to customer reps on the site, ask direct questions, and be open to the advice of those that are installers or operators. Designers who take an interest in how well their designs work in the field will become  valuable assets and continue to improve quality and safety for the site and their co-workers.

This post was written by Robert Fayard. Robert is a construction manager at MAVERICK Technologies, a leading system integrator providing industrial automation, operational support and control systems engineering services in the manufacturing and process industries. MAVERICK delivers expertise and consulting in a wide variety of areas including industrial automation controls, distributed control systems, manufacturing execution systems, operational strategy, and business process optimization. The company provides a full range of automation and controls services – ranging from PID controller tuning and HMI programming to serving as a main automation contractor. Additionally MAVERICK offers industrial and technical staffing services, placing on-site automation, instrumentation and controls engineers.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.