Achieve a higher safety performance level with EN ISO 13849-1

If you do not consider yourself as one of the early adopters of ISO 13849-1, is there still time to change to comply to the machine safety standards current requirements, and what does it involve?

05/09/2013


Over the past few years, safety has become one of the dominant factors that impact product design processes. European guidelines for machine safety have played a major role in reducing injuries and are bringing new requirements for product and component developers in their goal of working toward creating a better and safer working environment.

At the end of 2011, EN ISO 13849-1:2006 “Safety of machinery, Safety-related parts of control systems, Part 1: General principles for design” took effect. The EN 954-1 (CAT B, CAT 2, CAT3 & CAT4) was replaced by ISO13849-1, because programmable electronic systems were considered insufficiently; there was no consideration for direct connection between risk minimization, category, or complexity. Also, time response (e.g., testing intervals, lifecycles) and the failure probability of components (e.g., Common Cause Failures) were not considered. Therefore, due to all these aspects, EN 954-1 did not represent the state of technology anymore.

EN ISO 13849-1 addresses the programmable electronic safety devices that are being used increasingly in modern machines. The standard also provides a quantitative approach to risk assessment and safety validation. This ensures that safety is not solely a matter of component reliability, but also relies on common-sense safety principles such as redundancy, diversity, and fail-safe behavior. Under this standard, the risk assessment for a given safety function will yield a performance level (PL). This helps eliminate both over- and under-engineering, a costly or risky result of EN 954-1’s limitations.

Safety designers should start designing products using EN ISO 13849-1. It improves safety and the experience of working with the new requirements, and will have much greater long-term benefits than using EN 954.

- Information provided by Siemens Industry Inc. Edited by Mark T. Hoske, content manager, CFE Media, Control Engineering and Plant Engineering, mhoske(at)cfemedia.com.

ONLINE extra

To help users with ISO 13849-1 safety design aspects, Siemens Industry Inc. and TUV Rheinland are providing training and certification courses.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.