Actuators: Choosing the right technology

Machine designers should take a cross-technology view of power technology, choosing the most appropriate for their application.

04/26/2007


Hoffman Estates , IL —Machine designers should take a cross-technology view of power technology, choosing the most appropriate for their application. Potential choices for driving translational degrees of freedom include electric, hydraulic, and pneumatic actuators. This strategy helps build efficiency, performance, and sustainable competitive advantage into their designs. Start with a broad generalization about the primary application then consider using hydraulic, electric, or pneumatic motion (see table below), knowing that many exceptions exist and that many applications embrace more than one technology.

 

Motion technology considerations include:

 

Flexibility: Servo systems are ideal for allowing setup parameters to be easily changed so the system can be reconfigured with changes only to the control program. Pre-packaged and customized application programs make tooling changeovers fast and easy.

 

Reliability and maintainability: Great progress has been made in materials, component packaging, and installation methods. Advanced diagnostics and predictive maintenance have also advanced considerably for all three technologies.

 

Many applications are not limited to one technology and can take advantage of the unique characteristics of each. Closed-loop control—once seen as the special advantage of electric control—is now possible with hydraulics and pneumatics, significantly raising their capabilities. And the new technologies of mechatronics–electropneumatics and electrohydraulics–are the result.

 

Machine designers should take a cross-technology view of their machine, using the best, most appropriate technology for their equipment, and thus building in efficiency, performance, and sustainable competitive advantage. In addition, newer software tools aim to integrate three, once-separate realms of programming into one platform, helping to speed up and simplify engineering tasks from project planning and programming to visualization and diagnostics.

 

Additional guidelines appear in the May 2007 “Back to Basics,” called “Motion: Electric, hydraulic, pnuematic.” See other automation tutorials at controleng.com/tutorials .

- Rodney Rusk, Dan Warmus, Brian Rogers, and Thomas Dwyer are pneumatic, hydraulic and electric technology specialists from Bosch Rexroth Corp .

Edited by C.G. Masi and Mark T. Hoske, Control Engineering Machine Control eNewsletter

 

TABLE: Motion technology comparison for electric, hydraulic, pneumatic technologies

 


Hydraulic


Electric


Pneumatic


Working speed (velocity)


5 m/s


10 m/s


4 m/s


Power density


High


Low


Low


Achievable force


High


High


Limited, ~ 20 kN


Achievable stroke


High, to 10m+


High


High, to 10M+


Change of forces


Simple and accurate


Simple to complex


Simple and accurate


Efficiency


Best


Good


Good


Connections


Simple


Simple


Very simple


Overload safety


Complete


Complete


Complete


Explosion proof


Available


Available


Yes

 

Source: Control Engineering and Bosch Rexroth

 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.