Ambient light sensors for mobile technology

TAOS released the TSL2x72 series, which reportedly uses ALS technology for mobile technology in a variety of lighting conditions.

08/05/2011


Texas Advanced Optoelectronic Solutions Inc., (TAOS) announced its 5th generation sensor family, the TSL2x72 Series. It reportedly delivers improved digital ambient light sensing (ALS) and proximity detection technology. The TSL2x72 Series is especially designed to create the widest dynamic range of operation necessary for mobile products and adapt to all lighting conditions.

The TSL2x72 Series includes the following device families:

  • TSL2572 – Digital Ambient Light Sensing Family
  • TSL2672 – Proximity Detection Sensing Family
  • TSL2772 – Integrated Digital Ambient Light and Proximity Detection Sensing Family

The TSL2x72 Series enhances reportedly provides ALS and proximity detection operation in environments over 60,000 lux (sunlight). The improved dynamic range is enabled by the device’s new programmable gain modes, including a reduced gain mode. Proximity detection enhancements consist of increased signal-to-noise performance and a programmable register which allows compensation for optical signal crosstalk. Power management is improved with an automatic power-down mode after interrupt, which provides a "run-once" capability, and further reduces system power consumption.

The TSL2x72 Series is based on the patented TAOS dual-diode architecture, which enables the devices to produce accurate ALS and proximity detection results when operating behind spectrally distorting glass regardless of the lighting sources (such as sunlight, fluorescent) and intensity. These combined features reportedly enable smartphone ALS and proximity detection implementations, which increase energy efficiency, extend battery life and improve the end-user experience.

The TSL2x72 Series of devices are register set, footprint, and pin compatible with the widely-adopted prior generation of TAOS devices, the TSL2x71 Series. This compatibility enables existing TSL2x71 designs to rapidly migrate to the TSL2x72 while minimizing hardware and software design and development efforts. The TSL2x72 Series of devices incorporate an IR LED current-limited driver, analog-to-digital conversion (ADC), interrupt capability, multiple I2C interface voltage options (3.0 V or 1.8 V) and flexible programming allowing it to be configured into many different applications.

“Mobile device vendors are continually striving to deliver more compelling products with an improved user experience; therefore, they demand ALS and proximity detection solutions capable of operating in a very wide range of lighting conditions” said Jerry Koontz, TAOS, Inc. Director of Marketing. “The ALS and proximity detection technology enhancements provided by these new devices deliver both increased performance and system design flexibility. These new devices extend the TAOS leadership position in delivering technology supporting the global ‘green’ movement by delivering products which reduce overall system power consumption and thus increase energy conservation.”

The TSL2x72 Series is mainly suited for mobile devices but also has applications in HDTVs, computers, and other consumer electronic products. Proximity detection can be used for notebook and desktop computers to automatically turn off the display to conserve energy and maintain information privacy when a user is not present. Other emerging applications for proximity sensing technology include touchless display controls for netbooks, tablets, HDTVs, toys, office equipment, industrial controls, and many other products. In addition, the TSL2x72 Series “light-to-digital” sensor family can be used in any general non-display application where a high-sensitivity light sensor is required using an I2C interface.

www.taos.com 

Sensors Channel - see articles and products:

http://www.controleng.com/new-products/sensors.html



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.