Analyzing Stuxnet with Siemens

Two security experts at the 2011 Siemens Automation Summit talked about lessons learned during the Stuxnet affair.

07/12/2011


ISS SourceThey walked into the Lion’s Den and came out unscathed. Two security experts went into the 2011 Siemens Automation Summit and talked about lessons learned during the Stuxnet affair.

Joel Langill, chief security officer at SCADAHacker, and Eric Byres, chief technology officer at Byres Security, gave a talk Tuesday at the 2011 Siemens Automation Summit entitled “How Stuxnet spreads: A study of infection paths in best practice systems."

“Stuxnet was a well engineered worm,” Byres said. “This attack could have happened to any one of the vendors. It just happened the Iranian nuclear site was running Siemens products. Siemens was the bystander shot in the middle of the gunfire.”

As a result of his highly complex and impressive piece of software, security professionals will be studying Stuxnet for years to come.

“Stuxnet is dead and gone,” Byres said. “Why study Stuxnet? Because the bad guys learned a lot from Stuxnet and we have to do the same. How do I protect a client from the son of Stuxnet?”

When you really look at it, the worm was very clean software. “It was amazingly well written software, Byres said. “It was a better grade of software than what is installed in most commercial systems.”

The big news when the world first became aware of Stuxnet was people believed the worm entered control systems via a USB key. While that may have happened, it doesn’t seem right that users would ban the use of USB drives. They do serve a quality purpose.

“Don’t think of this as a USB problem,” Langill said. “It was a removable media problem.” One of the things you have to remember, Langill said, is this was not an Internet-based attack. Instead, this all happened on the local area network.

The worm did infect some 100,000 computers and infected at least 22 manufacturing sites, which Byres actually believes was more around the 50 number.

One of the shocking thoughts about Stuxnet was the worm was able to penetrate and damage a nuclear site, which has some of the toughest security in any industry. What happens, Byres asked, when another worm comes around and takes over a less secure environment?

The odd part of the entire attack was Siemens does have a solid layered security architecture in the systems targeted for attack.

As mentioned the attack could have happened on a USB stick, however it could also have come as a result of infected project files, transmitted in an email, an infected laptop among other possibilities.

“If someone wants to put a virus on your site, they will be able to,” Byres said. “It depends on what you do with that afterward is what is important. There was so many ways it could spread.”

Some of the things the industry learned from Stuxnet was modern industrial control systems or SCADA systems are highly complex and interconnected; there are multiple pathways; you have to assume an air gap is unrealistic; focusing security on specific obvious pathways is not a good idea, and users have to complete a simple overall holistic view of the system, Byres said.

- Edited by Amanda McLeman, Plant Engineering, www.plantengineering.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.