As An OEM – Can I Choose Which Standards?

10/25/2010


This is a frequent question where an OEM is approaching a new design or new machine. And, often this is the case when it’s a start-up OEM.

So, what’s the answer?

Several years back for me I would usually start my reply with “Well, it depends!” Those OEM meetings were usually pretty short. Today, I’ve learned to conduct some analysis of what the OEM is trying to accomplish, what their competitive landscape looks like, and if they’re trying to differentiate their new machine from other’s on the market. So, in my experience, OEM’s have chosen various electrical standards upon which to base their design and they’ve proceeded to build a competitive advantage for their application. On the other hand, I know plenty of OEM’s over the years that have maintained their design around certain electrical standards but have elected to differentiate their design on a proprietary mechanical design. Which approach is better? Or, does it even matter?

In my opinion, the answer to the first question is, yes - you can choose which standards to use in the U.S., today. And, the advice to the OEM is to be ready to support your decision and basis for design when called on! Regarding whether an electrical basis or a mechanical basis is best, that decision really rests on the individual OEM Company involved. My advice, when asked, usually points to the electrical standards because most of the innovative changes over the last ten years have surfaced with these standards. These innovative changes also allow the application of innovative controls with safety functions built into the components. This innovation can frequently deliver savings in engineering and material costs and, via built-in diagnostics, actually reduce the machine check-out time. In addition, all of these factors can actually reduce the time to market for a new machine. In my experience, this same level of innovation has not occurred on the mechanical side.

Here’s the bottom line in considering different standards for the basis of designs and machines. I suggest that you always take the time to determine the “listed” machine types printed within each standard (electrical or mechanical) to make certain that your design/application is covered by that standard.   

 Submit your ideas, experiences, and challenges on this subject in the comments section below.

Related articles:

How To Integrate Safety

Designing In Machine Guarding    

Contact: www.jbtitus.com for “Solutions for Machine Safety”.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.