AT&T gets its AirOn over-the-air subscription management of its global M2M SIM

On 12 December 2012, AT&T announced that it would use SIM provider Giesecke & Devrient’s “AirOn” technology to enable AT&T’s global SIM for M2M and connected devices.

05/09/2013


IMS Research (acquired by IHS, Inc.)On 12 December 2012, AT&T announced that it would use SIM provider Giesecke & Devrient’s (G&D) “AirOn” technology to enable AT&T’s global SIM for M2M and connected devices. AirOn is a remote SIM provisioning service that will enable AT&T to download local subscriptions – with local, in-country rates – to SIMs wherever local subscriptions are available from AT&T as a re-seller of a local MNO. IHS believes AT&T currently has such re-seller relationships in place in approximately 50 countries. Where AT&T does not have re-seller relationships available, the AT&T global SIM can still utilize AT&T’s roaming relationships with MNOs in over 200 countries.

Remotely- provisioned SIMs will play an increasingly important role in the M2M market. They provide key benefits, including: the potential for cost-optimization through tariff localization of globally-deployed SIMs (as in the case of AT&T), and supply-chain optimization for embedded SIMs. These so-called “white SIMs” are distinct from the concept of “soft SIMs” in that they retain use of an embedded hardware component, as opposed to being completely comprised of embedded software. This is a key point, owing to the MNOs’ concerns over the level of security that could be ensured by SIMs reliant on software alone, without an embedded hardware component. G&D, along with other SIM providers, show-cased proprietary white SIM technology at the Mobile World Congress 2012 tradeshow, but there are efforts to standardize the technology and IHS anticipates that such a standard will be available in the second half of 2013.

White SIM technology also underscores the growing importance of providing a global connectivity footprint for M2M deployments. Despite a historical prevalence of low volume, localized M2M applications, there is an increasing need for global deployability. This need is driven by the growth in highly mobile applications such as telematics and connected consumer electronics as well as the desire to provide a single SKU rather than create a multitude of SKUs localized to different countries. Several MNOs, including France Telecom/Orange, Vodafone, and Telenor Connexion, have launched global SIMs using the MCC 901 international IMSI range. While this facilitates global deployability such SIMs are still dependent on negotiated roaming rates between the host MNO and the roaming MNO. Consequently, white SIMs that can be homed onto a local network, either via a re-seller relationship or an inter-operator “alliance”, still offer the benefit of reducing tariffs. As such, IHS views white SIMs as the next logical progression in the optimization of global connectivity for M2M applications.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.