Automation justification

Automation ROI: For maximum return on investment (ROI) when deciding to automate, ensure systems can scale with an operation, evolve, and be redeployed for maximum return on investment. For a productivity boost, follow 6 key steps for determining when and where to apply or upgrade automation. Don’t automatically think commercial-off-the-shelf technologies are better than a lean customized solution. Finally, economical controllers and universal programming software can ease the point of entry.

09/09/2013


For maximum return on investment (ROI) when deciding to automate, ensure systems can scale with an operation, evolve, and be redeployed for maximum return on investment. For a productivity boost, follow 6 key steps for determining when and where to apply or upgrade automation. Don’t automatically think commercial-off-the-shelf technologies are better than a lean customized solution. Finally, economical controllers and universal programming software can ease the point of entry. See more description of each article and links to each at the bottom.

This Alvey Hybrid motion control system shows robotic arms manipulating cases inside a conventional palletizer. Hybrids offer flexibility and repeatability of robotic arms with the speed and reliability of conventional palletizers, which can be ideal forWhen to automate: Conventional and robotic applications

For modular conventional, robotic, or hybrid motion control applications, ensure that systems can scale with an operation, handle evolving packaging styles, and be redeployed to alternate production lines for maximum flexibility and return on investment.

When deciding when to automate, system integrators can help

Automation can boost productivity when correctly applied. Here are 6 steps for determining when and where to apply or upgrade automation.

Custom automation vs. commercial-off-the-shelf, or both?

How to automate is as important as when. Custom is not a four-letter word. Weigh the benefits of commercial-off-the-shelf (COTS) and a custom solution, rather than restricting an automation project view to a COTS or custom solution. Customers may steer away from anything custom for a variety of reasons—many of which are unfounded.

When to automate: Economical controllers ease the entry point

With automation becoming more flexible, smaller lot sizes can make it practical to profitably automate what previously was considered only for hand assembly. Modular, flexible embedded PCs, programmable with one software platform, can lower the entry point for when to automate. Here are considerations when looking at what and when to automate.

- Edited by Mark T. Hoske, CFE Media, Control Engineering, mhoske(at)cfemedia.com 

Online extras

Also see the “Real World Engineering Blog” July 16 post, “If it ain’t broke, don’t automate it?” Maybe it is broke, and you just don’t recognize it. Sometimes problems and inefficiencies in plants persist simply because nobody wants to take responsibility for finding a solution. Effective automation might be the key.

Also, link to the following: 10 steps to a smoother automation system upgrade -- When migrating or upgrading your automation system, don’t forget to examine this group of areas outside of the HMI, controllers, and I/O. These suggestions will help you identify and deal with lurking problems early in the process.

 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.