Baxter the robot

A robot for unskilled tasks that every plant has.

01/24/2013

Flash is required!

Scott Eckert, rethink robotics CEO, talks to Peter Welander at Automate2013.



Baxter the robot.The Automate show has been in Chicago this week, and that means lots of robots. Normally that isn’t my coverage area for Control Engineering, but I received an opportunity to come down and meet Baxter, the new offering from Rethink Robotics. Baxter has gotten a great deal of exposure since he came onto the scene last fall. He’s been the subject of articles in newspapers and business magazines, as well as TV appearances.

Baxter is designed to be versatile, inexpensive, and simple to use. For a fraction of the cost of a simple traditional industrial robot, you can buy your own unit and have him in your plant. Anybody (within reason) can program him. He’s on wheels, so you can move him to any workstation. His movements are kind of slow, but that is intentional so he can work next to people and not endanger anybody. His arms bend and they stop when hitting an obstruction. You could probably beat him in an arm wrestling contest.

Actually Baxter makes me think of the broom-carrying robot from the Warner Brothers cartoon, “House Hunting Mice” from 1947 (pictured), although he can’t roll himself around. Maybe there was some design influence.

An earlier robot concept.So, what’s the big deal? Why all this exposure, and why was there always a crowd around the company’s booth at the show? Compared to other robots, Baxter is the equivalent of unskilled labor. That’s not a put-down because manufacturing facilities all need some folks that are happy doing jobs that others would find far too boring. Baxter can be there in the plant, and when he’s needed, roll him to the right spot and train him to do the task. By all appearances, he can be trained for a simple function in a matter of minutes following an intuitive teaching method. You don’t plug in a laptop, write any code, deal with a PLC, or any of that. His two arms can even be programmed to carry out separate and unrelated tasks. Baxter is cheap enough that if he doesn’t have something to do every day, you won’t feel like you’re wasting money.

I’ve worked in enough manufacturing situations to have seen many scenarios where Baxter would do the job nicely. There are faster robots, stronger robots, and more sophisticated robots that are probably better suited to more complex tasks, but few if any that are easier to work with. The question will be if users find his skill set enough to make him one of those indispensible devices that every plant will want. It may come down to creativity.

Peter Welander, pwelander(at)cfemedia.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.