Can we do without nuclear power?

Can we, as some suggest, shut down some or all our nuclear power plants? What will make up for that lost generating capacity?

04/29/2011


Dear Control Engineering: After recent events in Japan, there are people calling for nuclear plants to be shut down forever. Is this even possible? Could we do without that much generating capacity?

One of the very practical considerations in the nuclear power controversy is if we can do without it. The answer to that question depends on where you are. World-wide, nuclear power generates about 14% of total output, but locally that number can vary drastically. France gets most of its power that way. The U.S. is more than 20%. More importantly, almost without exception, nuclear power plants are base loaded, meaning they run constantly at or near their capacity. Some plants modulate their output to reflect demand, but nukes run hard all the time. This means that any replacement technology has to be able to equal that.

Even the most enthusiastic anti-nuclear activists would be reluctant to suggest that coal-fired plants be built instead. There is the whole global warming thing and other classes of pollutants. Renewables are difficult if not impossible to use for base loading. So what is the alternative? Arguably the only practical one is natural gas.

If there is any country that has a high likelihood of actually shutting down its nuke plants, it’s Germany. The political climate there certainly points in that direction. A recent report by Deutsche Bank cited in The Economist reasons if Germany shut down all its reactors, it would have to build about 23,000 MW of new gas-fired capacity for base loading. That’s a lot, but not out of the question. Think of it as about a dozen two-unit plants. So where will all that gas come from? As it turns out, there is capacity in Europe and Russia that was developed to service the U.S. However, with our growing domestic production, we aren’t importing as much as we used to, so that output can be repurposed. Of course Germany’s annual carbon dioxide emissions will increase by several hundred million tons in the process. That’s far lower than it would be for coal, but it still isn’t free.

Peter Welander, pwelander(at)cfemedia.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.