Cemex USA and Ford receive EPA Energy Star recognition

Initiatives aimed at energy management and greenhouse gas emissions reduction garner Cemex and Ford EPA 2010 Energy Star awards.

03/04/2010


The U.S. Environmental Protection Agency (EPA) has named Cemex USA a 2010 Energy Star Partner of the Year for outstanding energy management and reductions in greenhouse gas emissions. In related news, Ford Motor Companyearned its fifth straight Energy Star Award for Sustained Excellence.

Energy Star

Energy Star Logo. Source: Santa Clara University.

Cemex USA, an Energy Star partner since 2004, is receiving the Energy Star Partner of the Year award for strategic energy management and a commitment to save energy across its entire operation that has resulted in significant energy and financial savings. This isthe second year that Cemex USA has been named Partner of the Year. In 2009,Cemex reduced its overall energy intensity by 2.2% as a result of its energy management program using Energy Star guidelines. More than 1.1million MMBTUs were saved through such measures as commissioning two new cementlines using state-of-the-art vertical roller mills for finish grinding,replacing and repairing compressed air systems, and upgrading plant lighting.This energy savings resulted in cutting 107,500 metric tons of CO2 emissionsand is equal to providing electricity to 14,900 American homes for one year, oravoiding emissions from about 19,700 passenger vehicles.

The energymanagement program at Cemexemploys a corporate energy management team and a site energy teamat each plant to deliver on the company's energy conservation and sustainable manufacturing practices. Cemex cement plants in Clinchfield, GA,Davenport, CA, Knoxville, TN, Louisville, KY, and Wampum, PA, have all receivedEnergy Star certifications for their work to protect the environment throughenergy efficiency.

Ford's recognitionresults from the company's 2009 energy efficiency improvement of 4.6%,resulting in savings of approximately $15 million. Actions that have enabledFord's energy efficiency gains include updated heating and lighting systems andadvanced computer controls. The 2010 award marks the fifth consecutive year thatFord has been recognized with the EPA's Energy Star Award for its actions toreduce the amount of energy used to manufacture vehicles.

Since 2000, Ford's U.S. facilities have improvedenergy efficiency by more than 30%. That's equivalent to the annual energyconsumed by more than 110,000 homes. Actions taken by Ford since 2000 that havecontributed to its overall energy efficiency improvement include:

  • using flexible tooling to assemble multiple vehicles on the sameproduction line, which requires less manufacturing floor space andoptimizes plant utilization;
  • facility lighting system updates by replacing inefficienthigh-intensity discharge fixtures with up-to-date fluorescent lights andcontrol systems;
  • upgrading paint process systems, including booth air handling andimproved emission controls;
  • continued development of Ford's "Paint Shop of theFuture" processes, including fumes-to-fuel that turns paint fumesinto electricity, the 3-Wet painting process that significantly reducesthe footprint and energy use of paint booths, and zirconium oxidepretreatment that uses less energy to inhibit surface corrosion;
  • installation of advanced computer controls on all North Americanplant air compressors for paint shop applications and pneumatic tools;
  • use of a PC power management program to improve global energyefficiency with an estimated reduction in the company's carbon footprintof between 16,000 and 25,000 metric tons annually;
  • a "Go Green" dealership sustainability program to improvethe energy efficiency of Ford and Lincoln Mercury dealerships;
  • aggressively curtailing energy use during extended productionshutdown periods;
  • leveraging the Energy Star program through employee energyawareness communications and events, development of energy modeling andanalysis tools, and replication of industry best practices; and
  • updating heating systems at manufacturing facilities by replacingoutmoded steam powerhouses with digitally controlled direct-fired naturalgas air handler.


Access other Control Engineering contentrelated to energy efficient manufacturing initiatives:

 

 

-Edited by DavidGreenfield , editorial director
Control Engineering Sustainable Engineering
News Desk



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.