Chinese market for industrial robots to grow

China’s market for industrial robots is estimated to rise to $1.3 billion in 2017.

01/06/2014


China’s market for industrial robots is estimated to rise 10 percent from $810.4 million in 2012, according to a new report from IHS.

An estimated more than 29,000 industrial robots were sold in China in 2012, with unit shipments to increase by about 13 percent per year from 2013 to 2017, IHS said. By 2017, industrial robot unit shipments will reach more than 52,000 units. 

“The growth rate for revenue is less than that of unit shipments because of the expanding market, fierce competition and technical advances lead to the price erosion,” said Jay Tang, industrial automation analyst for IHS.

Articulated robots are the largest segment by robot type, accounting for 87 percent of the total market in 2012, and it is predicted to remain so through 2017. Most of these robots will be used for welding applications in the automotive sector.

From 2012 to 2017, revenues generated from selective compliance assembly robot arm (SCARA) robots are forecast to grow the fastest because the industries in which they are used are facing labor shortages and rising labor costs. Food and beverage, consumer electronics, and electronics/electrical are three of the most labor-intensive industries, and robots are being used more in these areas.

Some articulated robot suppliers, in particular, are entering these areas with high performance-price ratio and flexible products. SCARA robot suppliers will continue to dominate here because of their lower prices, as well as experience and industry knowledge.

Meanwhile, the market for linear robots is fragmented given the limited technology content of the machines and because of their low robot prices. Linear robots are used to do work including handling operations, simple assembly and simple machining. There are many market leaders in niche markets, including rubber and plastics, electronics and metal processing.

For their part, parallel robots are used to quickly pick up and assemble light payloads in the food/beverage/personal care and electronics industries. This market is very small and very few suppliers currently exist for this robot type.

Some international suppliers believe that parallel robots will be replaced by articulated types because the latter are getting faster. Still, establishing economies of scale here is difficult because the price of parallel robots is higher than that of other robots, even though some suppliers are developing new applications, such as polishing.

At the other end of the spectrum, the market for cylindrical robots is decreasing because of their limited dexterity. As articulated robot sizes and prices decrease, they offer greater dexterity at competitive prices. A further breakout for cylindrical robots is not included in the report covering the overall subject. 

Finally, for dual-arm robots, not many manufacturers have these machines available for commercial use, and no dual-arm robots were sold in China in 2012. IHS predicts that production of industrial robots in China will start with low-end applications, and as dual-arm robots are high-end products, they are unlikely to be produced from 2013 to 2017.

- Edited by Jessica DuBois-Maahs, Associate Content Manager, CFE Media, Plant Engineering, Control Engineering



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.