Choosing output formats for instrumentation transmitters

Why isn’t it easier to offer user selectability of signal format for field devices?

05/06/2011


Dear Control Engineering: The article about new gas flowmeters says that the company is using a more modular transmitter that makes it easier for the user to select a signal format. Why aren’t more companies doing that? Having to change field devices is a major drag on trying to use a more sophisticated networking technology.

 

One of the more interesting aspects of the flowmeters that FCI has introduced is the modularity of its transmitter. While most devices are hard wired to one specific format (e.g., 4-20 mA with HART or Foundation fieldbus), these new devices offer a plug-in module to allow users to change the output format.

I don’t know if this is the first time somebody has done this, but it certainly is not a common feature. Typically a transmitter is indeed fixed to a given protocol. This fact has made the process of migrating to a more sophisticated networking protocol much more expensive. For example, if all the devices in a process unit use 4-20 mA or some older analog voltage signal, you’ll probably have to replace them all if you want to move to a fieldbus. FCI has promised that its new transmitter is future proof in the sense that if you do need to make such a change, you can change the module (assuming the right format is available) and not the whole device. The company plans on using this approach with larger portions of its product line as time goes on.

To my thinking, a typical flowmeter or pressure sensor ought to come with a universal transmitter that is software configurable or you set a group of DIP switches to give the connectivity you want. Set it yourself for anything from 4-20 mA, Modbus, USB, Profibus, Foundation fieldbus, or any number of industrial Ethernet flavors. Maybe we’ll even throw in wireless. That isn’t quite practical yet, but I doubt it is far away. Some protocols still depend on a dedicated ASIC which is probably why having a plug-in component is still a requirement. My approach is probably still much too expensive, but might be here sooner than you think.

Subscribe to our Process Instrumentation & Sensors eNewsletter.

Peter Welander, pwelander(at)cfemedia.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.