Concentrating solar power emerging

Developments for the SunShot Initiative are underway to reduce the cost of energy systems and make the technology more robust for future users.

04/25/2013


ISS SourceSolar energy is feasible and the potential benefits can be staggering, however, the costs remain a barrier to full adoption.

There are now two solar energy goals: Make the technology cost efficient and make the technology more robust.

That is where Ranga Pitchumani, the John R. Jones III Professor of Mechanical Engineering at Virginia Tech, comes in.

Pitchumani is working toward achieving the goal set out in February 2011 in U.S. Secretary of Energy Steven Chu’s Dept. of Energy SunShot Initiative. Its objective was to reduce the installed cost of solar energy systems by about 75% in order to allow widespread, large-scale adoption of this renewable clean energy technology.

Following the initiative, Pitchumani started directing the Concentrating Solar Power (CSP) program for the SunShot Initiative.

“The SunShot goal is to get solar energy technologies to achieve cost-parity with other energy generation sources on the grid without subsidy by the year 2020. That’s an aggressive mission that calls for several subcomponent innovations and ingenious system designs to drive costs down, while improving efficiencies,” Pitchumani said.

“Concentrating solar power technologies use mirrors to reflect and concentrate sunlight to produce heat, which can then be used to produce electricity,” Pitchumani said. These technologies present a distinct advantage over photovoltaic (PV) cells in their ability to store the sun’s energy as thermal energy, and represent a subset of the SunShot Initiative.

Pitchumani and his research group at Virginia Tech developed novel thermal energy storage technologies for concentrating solar power applications.

“Fossil fueled power plants pose a potential risk to the environment through an increased carbon footprint, and my efforts are in supplanting fossil energy with renewable sources including solar energy,” Pitchumani said. “Concentrating solar power plants capture the solar energy and store it as heat, which can, in turn, be used to drive a turbine and produce electricity. In fact, studies have shown that CSP with thermal energy storage also facilitates greater incorporation of other renewables such as wind and photovoltaic on the grid. That’s a win-win on all fronts,” Pitchumani said.

“Due to the intermittent nature of solar energy availability, it is often desirable to store thermal energy from a concentrating solar power plant for use on demand, including at times when solar energy is unavailable such as during cloud cover or overnight. Energy can be stored either as sensible heat (in solid or molten media), latent heat (using phase change materials), or as products of a thermochemical process, of which latent heat and thermochemical storage offer high volumetric energy density and potentially high power cycle efficiency, provided costs can be tamed,” he said.

In his role, Pitchumani oversees a team of several program managers, technical, financial and support personnel, who actively manage the awards in the portfolio. During his leadership, the SunShot Concentrating Solar Power Program launched over $130 million in new funding initiatives since October 2011.

Concentrating solar power plants could provide for low-cost energy generation and have the potential to become the leading source of renewable energy for future power generation. In the U.S., several large-scale commercial plants (e.g., Ivanpah Solar Electric Generating Station (SEGS), Crescent Dunes Solar Energy Project, and Abengoa Solana Generating Station) are currently under construction, with some getting ready to fire up in a few months, that would more than triple the total capacity of Concentrating Solar Power-generated electricity to about 1.8 GW and place the U.S. as one of the global leaders in CSP capacity.

On a worldwide scale, studies suggest concentrating solar power technology systems could provide approximately one-quarter of the global electricity needs by 2050, Pitchumani said.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.