Control algorithm software optimizes solar energy harvesting

Beckhoff Automation TwinCAT Solar Position Algorithm library brings embedded PC-based control to solar power plants in a feature-laden function block that permits the exact calculation of sun angles anywhere in the world at any time, without the use of sensors.

09/24/2010


To bring cost-effective and high-performance embedded PC-based control to solar power plants, Beckhoff Automation released the TwinCAT Solar Position Algorithm library. This feature-laden function block permits the exact calculation of sun angles anywhere in the world at any time, without the use of sensors.

The TwinCAT solution is designed for parabolic mirror and photovoltaic systems, as well as for other solar power plant designs that automatically track the sun's position for optimum utilization of the sun's rays. The control algorithm, which calculates the zenith and azimuth angles of the sun with an impressive precision of ±0.001 degrees, can also be used for other applications. Photovoltaic, CSV and CSP installations that track the sun position operate similarly. Another area of application for this solution is in building automation, where sensors alone are no longer sufficient to adequately deal with shading of large building facades. The Beckhoff software can also be used for exact calculation of shadow flicker from wind turbines, which is to be avoided in populated areas. The results allow individual turbines to be switched off if necessary.

The software library enables high-precision determination of sun angles and the times for sunrise, solar noon and sunset year-round. Depending on the required precision, the algorithm can take into account parameters, such as the time zone, the height above mean sea level, the slope of the ground or the orientation of the object, as well as the air temperature and pressure, which influence atmospheric refraction.

TwinCAT software is a complement to EtherCAT, Beckhoff's Industrial Ethernet-based technology. EtherCAT provides low microsecond level communication speeds, full connectivity to higher level systems and to IEEE 802.3 Ethernet-based infrastructure. EtherCAT also facilitates cost-effective Web-based remote maintenance capabilities. EtherCAT is compatible with copper and/or fiber optic cabling at distances up to 20 km (12.4 mi) for single-mode fiber optics or 2 km (1.2 mi) for multimode fiber optics. It also permits wiring via line, tree, star and/or mixed topologies.

www.beckhoffautomation.com

Beckhoff Automation

- Also read:

Smart grid options, including solar, examined at Siemens Smart Grid Tour Event

Schneider Electric powers up photovoltaic solar array project at Palatine headquarters

Control Engineering System Integration channel


- Renee R. Bassett for Control Engineering, www.controleng.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.