Coriolis flowmeter offers selections of materials and finish

E+H Proline Promass 100 Coriolis mass flow transmitter lets users customize sensor features for food, beverage, life sciences, pharmaceutical, chemical, and other industries.

09/04/2012


E+H Proline Promass 100 Coriolis mass flow transmitter lets users customize sensor features for food, beverage, life sciences, pharmaceutical, chemical, and other industries.Endress+Hauser has introduced the Proline Promass 100 transmitter which can be combined with industry-specific sensors, materials, and finishes so it can be used in applications with very specific configuration requirements. The unit can measure mass flow, volume flow, density, viscosity, concentration, and temperature with accuracy up to ±0.05%, and with immunity from process and environmental influences. All measurements are fully traceable as the flowmeter is certified on calibration rigs accredited to ISO/IEC 17025.

I/O options include EtherNet/IP and Modbus RS-485 digital communication, plus 4-20 mA with HART and Profibus DP will soon be available. Wiring is via an M12 plug. It is approved for operation in Zone 2 and Class 1, Division 2 hazardous areas; and with the intrinsically safe Modbus output, it is approved for Zone 1 and Class 1, Division 1.

E+H says that the range of sensors is designed to comply with guidelines and regulations in different industries. For example, the Promass P 100 for life science and pharmaceutical industries is a single-tube system designed for sterile processes. It meets ASME-BPE 2009, ISPE, FDA, EHEDG and 3-A process codes and standards, and features a self-drainable hygienic design that is cleanable on the inside and outside during CIP/SIP cleaning cycles.

If the application is for food and beverage, the S 100 conforms to all 3-A, EHEDG and FDA requirements. It provides a gentle, non-invasive measurement of the product without causing shear force. It also is drainable and withstands CIP/SIP cycles with immediate return to normal operation, including high pressure or steam jet cleaning. 

www.us.endress.com

Edited by Peter Welander, pwelander(at)cfemedia.com

pwelander(at)cfemedia.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.