Create value through software reuse

Value of software standards was among automation system integration topics discussed by Callisto Integration at a recent software conference. Video is 3:08 minutes.

11/04/2013

Flash is required!

Mike Peters (left), director of sales, and Andrew Barker, PEng, director advanced control systems, Callisto Integration, discuss automation software integration and re-use at the Invensys 2013 Software Conference and Tech Support Symposium (demonstratingValue of software standards was among automation system integration topics discussed by Mike Peters, director of sales, and Andrew Barker, PEng, director advanced control systems, Callisto Integration, at the Invensys 2013 Software Conference and Tech Support Symposium (demonstrating Invensys products from Avantis, SimSci, and Wonderware) in October. (Video is 3:08 minutes.)

Standards-based software is easier to move from site to site, to upgrade, and to improve incrementally, suggested Peters. 

One customer, in the process of a multi-year software-upgrade project, worked with Callisto Integration to take software developed for a North American facility, put it on a USB stick, and then install the software in the customer’s Asian facility for 20% of the cost of the original, Barker said. In addition, project costs for the commissioning cycle of the project were 10% less than expected. Standard project templates and an organized framework within the software helped decrease the time to adapt already configured applications to the new site, he explained.

Software structures

Software reuse drastically reduces system integration costs as this chart shows. Courtesy: Callisto Integration.Structuring software with reuse in mind takes more effort up front than single use, especially if those doing the configuration haven’t done it that way before, Barker noted. The icing on the cake for this application, Barker said, is that when a new product is developed in North America, it can be e-mailed to the Asian plant, where it can be in production there within a 48-hour period.

Food and beverage and SCADA solutions are more easily built in scalable fashion over time, using off-the-shelf offerings, achieving a great return on investment (ROI), Peters noted. And software configuration help is available from system integrators.

For more explanation about the value of software reuse, see the graph and table provided, and click into the related Automation System Integration blog post at bottom of this file.

Software reuse drastically reduces system integration costs, as this table shows. Courtesy: Callisto Integration

- Text by Mark T. Hoske and video by Peter Welander, content managers, CFE Media, Control Engineering, Plant Engineering, and Consulting-Specifying Engineer, mhoske(at)cfemedia.com.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.