Creating your own cellular network

If you want to use cellular communication for remote I/O and devices, does that mean signing up with a commercial carrier?

12/17/2010


Dear Control Engineering: I’ve seen discussions of using cellular technology for industrial wireless devices, here in this blog, in the wireless Webcast, and some other recent product-related articles. Does using cellular technology assume that I will engage a commercial service provider, or do I have the option of creating my own private network?

While it is relatively simple for you to set up many types of wireless networks such as Wi-fi, ISA100.11a, WirelessHART, and many other proprietary systems, cellular is probably not one you will do on your own. It is possible, at least in theory, that you could set up your own network, however it would be expensive and not very practical.

The whole point of using cellular technology is that you don’t have to create your own wireless infrastructure. The relatively high cost of paying for the service is offset by not having to make the large up-front investment to create the network to reach isolated I/O.

If you are intent on trying to create the same type of functionality as you might want from cellular service but with your own infrastructure, there are other radio technologies that would represent a better choice.

Listen to the Webcast, Connections without Wires: How wireless technology creates new paths to productivity.

Peter Welander--pwelander(at)cfemedia.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.