DC electrical transmission growing

07/30/2010


Dear Control Engineering: It seems that using dc for electrical distribution is growing. How is this practical?

You shouldn’t expect to have your residential electrical service converted to dc anytime soon. The considerations that made utilities adopt ac almost universally over the last century continue to apply for most uses. Still, there are applications where high voltage dc is being used to great advantage. If you have to move a large amount of electric energy from point A to point B, dc may be the better choice. However, for more typical grid distribution applications, ac still does the job.

For example, ABB just completed a project in China that has pushed out the boundaries. There’s an area in southwest China near Xiangjiaba where there are hydroelectric generating units that put out a lot of power. The problem is that the power is needed in Shanghai which is about 2,000 km (1,200 mi.) away.

Ultra-high voltages require exotic switchgear.This new power line (note that the term is singular) carries 7,200 MW over that distance at 800 kV. ABB says it’s very efficient with less than 7% line loss over that distance. Once the juice gets to Shanghai, it is converted into ac for more traditional local distribution.

(You may remember that in our post last week, we discussed definitions of medium- and high-voltage. Once you’re around 800 kV, you’re definitely in the ultra-high cagegory.)

ABB has been doing a lot of research in this area and has developed the transformers, converters, and switchgear to handle these extreme levels. Earlier efforts in service include 500 and 600 kV systems, but raising the voltage increases efficiency.

Such deployments will likely become more common for applications where generating capacity is removed from consumers, such as hydroelectric and wind generation. It can even help make it more practical to locate coal-fired plants at the minehead, rather than moving coal from a mine to distant plants via rail.

--Peter Welander, pwelander(at)cfemedia.com 
Control Engineering



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.