Design, test custom servo motion algorithms to improve robot, gantry performance

MechaWare 4.0 software from Kollmorgen leverages Matlab and Simulink; control algorithms minimize system weight and power consumption, and eliminate vibration for optimized mechanical system performance.

04/07/2010


Kollmorgen KOL514 MechaWare 4.0Kollmorgen introduces MechaWare 4.0, a mechatronic "toolkit" that empowers software and design engineers to work together to design, test and modify custom motion algorithms in a fraction of the time and cost of conventional methods.

This upgraded software leverages Matlab/Simulink from The Mathworks to identically model and seamlessly integrate mechanical systems and control software design. Whether engineers are looking to implement and test a simple PID algorithm, or build a multi-axis controls model using pre-filters, observers and biquad filters, MechaWare 4.0 is scalable to meet specific design needs.

"Motion system vibration can create significant problems by limiting throughput, creating noise and reducing component life," says Joshua Jensen, product manager. "It further impacts machine quality and reliability, consuming excessive energy and forcing expensive mechanical structures to accommodate. With MechaWare 4.0, design engineers can rapidly design and implement unique control algorithms and generate embedded motion routines to engineer an exact-fit control solution, saving time, material cost and overall system cost-of-ownership.

Additionally, OEMs can test and validate their design using Matlab/Simulink's powerful simulation engine, and use integrated analysis tools such as Kollmorgen's Bode Tool to accurately characterize system performance and quickly tune the motors."
Jensen says over 80 MechaWare blocks have been optimized for motion control, and "all of those blocks matched to controller firmware performance to ensure that control model behavior is nothing less than identical to the actual hardware response." Thus, MechaWare 4.0 promises significantly faster and more precise designs, increased throughput and reduced settling time to maximize mechanical system efficiency, he says.

The MechaWare 4.0 graphical interface allows controls engineers to reduce development cycles and simplify machine design. They are also able to embed inverse kinematic calculations in firmware for customized, real-time performance, define coordinate transformations to improve system accuracy based on registration mark or vision system input, and create motion and I/O routines in firmware for reduced latency and improved safety.

MechaWare 4.0 also does the following:

• Reduces motor cogging. The software includes tools to map and compensate for error due to motor cogging, with increased smoothness for constant velocity applications
• Protects intellectual property through direct download to firmware
• Provides sample models for common architectures, including inverse kinematics, gantry systems, robot configurations
• Embeds axes relationships, providing flexibility to implement MIMO control, inverse kinematics and axis translations
• Delivers standard control blocks-PID/PIV, biquad, observer, matrix gain, lookup tables and more-and motion and I/O Blocks (sequence, trigger, motion and I/O through model for embedded routines).

For more information, download a PDF of the Kollmorgen MechaWare 4.0 motion control brochure .

Kollmorgen is a provider of motion systems and components for machine builders around the globe, with over 60 years of motion control design and application expertise. Kollmorgen's US corporate offices are located in Radford, VA. US sales and support offices are in Santa Barbara, CA.
- Edited by Renee Robbins, senior editor
Control Engineering News Desk
Machine Control, Motion Control news from Control Engineering



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.