Domestic oil sources drying up?

08/19/2010


An interesting article recently made the point that crude oil production from Alaskan fields is declining, and the big pipeline that brings product south is reaching the point where it is turning into a maintenance problem. Long story short, these days the pipeline is delivering less oil, which increases problems with corrosion and damage from the environment. You can walk faster than the flow velocity.

The fields in Alaska that have been the biggest producers are declining and there isn’t much enthusiasm for expanding drilling, especially offshore. Of course there’s no interest in expanding offshore drilling anywhere around here these days, especially the gulf. This will be a problem in the long run. The Alaska pipeline needs some work, but if drilling continues to be restricted, there is little incentive to fix it.

Unless these situations change and reverse the downward production spiral, the only alternative is increasing imports or cutting consumption. As discussed here last March, consumption in North America is below its peak in 2007, and refiners are cutting capacity. I don’t have the most recent statistics, but domestic production has probably dropped even more, which means oil imports are creeping up again.

If you were to ask most Americans if they would be willing to change their behavior, in this case make a personal effort to reduce oil consumption, you probably wouldn’t get many who would take up the challenge. Of course nobody wants to see oil spills here, which is why imports will go up. Importing oil allows us to export most of the risk and mess. Seeing TV coverage of a spill or other damage somewhere in South America or Africa doesn’t carry the same impact as tarballs washing up in Louisiana.

Maybe that’s a cynical attitude, but consider this: Frito-Lay brought out a new type of bag for its Sun Chips products. The bag is compostable and biodegrades. It’s made from vegetable products. Those are good things, right? Sales of Sun Chips have declined since the bag’s introduction. The complaint? The bag makes too much noise. So much for changing behavior.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.