Drives and motion accelerator toolkit wizard

Rockwell's DMAT now has a system development wizard designed to simplify the machine-design process and guides users through a step-by-step process that includes input about machine requirements and CAD drawings.

04/16/2013


Rockwell's DMAT now has a system development wizard designed to simplify the machine-design process and guides users through a step-by-step process that includes input about machine requirements and CAD drawings. Courtesy: Rockwell AutomationRockwell Automation has launched a system development wizard for its Drives and Motion Accelerator Toolkit (DMAT) that simplifies the machine-design process. In fact, the wizard has the ability to save OEMs up to 90 percent of the time required to select, configure and troubleshoot an integrated drives and motion control solution. 

The DMAT wizard guides users through each step of selecting and programming a drives and motion solution. The proactive interface prompts users for input with questions about their machine requirements, such axes of motion, torque and speed. Based on the users responses, the software presents them with a choice of motor and drive combinations for a variety of load, transmission, and application types. Once the user selects preferred components, the DMAT will produce a bill of materials. 

The toolkit also provides a beginning set of CAD drawings, wiring diagrams, panel layouts, and automatically pulls proven code from the DMAT library into a project file so users have preconfigured controller, network, drives and initial system program logic. The toolkit will also provide a custom set of instructions to quickly adapt a starting HMI application. 

Eliminating much of the time associated with routine tasks in drives and motion system design can reduce overhead costs and speed time to market. The system development wizard makes drives and motion system design simple enough that engineers with less experience in drives and motion system design or programming can successfully design a system and produce the initial logic and HMI application. 

Finally, DMAT will also run diagnostic tests to troubleshoot potential problems with the system and provide suggestions on how to fix any issues found, all before physical prototyping begins.

Rockwell Automation

www.rockwellautomation.com 

See other motor and drive hardware and software from Control Engineering.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.