Dual-membrane pH electrode for tough chlor-alkali processes

Mettler Toledo Process Analytics announces the launch of its InPro 4850i pH electrode designed specifically for the requirements of the chlor-alkali industry.

05/01/2012


The Mettler Toledo Process Analytics InPro 4850i features a sodium-sensitive glass membrane that uses the brine present in chlorine production as a reference. The hermetically sealed reference provides a barrier against oxidizing agents that poison other sensors. This feature, combined with digital transmission of the measurement signal, means the InPro 4850i is ideally suited to chlorine production, the company said.

Unlike almost all other pH electrodes, the InPro 4850i does not have a diaphragm, therefore poisoning of the electrode's sodium reference system is impossible. This design innovation ensures stable measurement and eliminates sensor drift. The electrode's high quality pH-sensitive glass membrane is extremely resistant to chlor-alkali process conditions, enabling precise pH measurement. 

InPro 4850i pH electrode, Courtesy: METTLER TOLEDOThe output signal from traditional dual-membrane pH electrodes suffers from electrical interference. Its sodium-sensitive glass has high impedance. Factoring in additional impedance of the cable between sensor and transmitter means that the signal from the sensor is highly sensitive to interference from surrounding equipment. Touching or approaching the measurement system can create a change in the output.

Mettler Toledo's Intelligent Sensor Management (ISM) technology solves this challenge. Sensors with ISM convert the analog measurement signal into a low-impedance digital signal which is immune to electrical interference, ensuring 100% signal integrity and stability. ISM technology also offers sensor self-diagnostics, pre-calibration of sensors, and Plug and Measure start up to simplify installation and maintenance tasks.

This unique combination of dual-membrane, sealed reference system and digitized signal makes the InPro 4850i unique and the ideal solution to pH measurement in the chlor-alkali industry.

The company offers many pH, ORP, DO, O2, CO2, conductivity, and turbidity sensors and transmitters, cleaning, and calibration systems.

More information on the InPro 4850i is available at www.mt.com/inpro4850i  



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.