EC: AZM300 Interlock Switch

Safety - Machine safety: The AZM300 is a solenoid locking keyed interlock switch with integrated RFID based electronic safety sensor for machine guarding applications with washdown or hygienic requirements. This is a Control Engineering 2014 Engineers’ Choice award winner.

10/17/2013


Safety - Machine safety: The AZM300 is a solenoid locking keyed interlock switch with integrated RFID based electronic safety sensor for machine guarding applications with washdown or hygienic requirements. This is a Control Engineering 2014 Engineers’ Choice award winner.The AZM300 is a unique combination of solenoid interlock and electronic safety sensor.

One look at the AZM300 and one cannot help but notice the distinctive external cross-shaped cam. This design allows the AZM300 to accept the actuator from any of three sides, providing mounting flexibility for either left- or right-hinged doors, or sliding guards. The solenoid locking force of 1,000 N keeps the guard door securely locked until dangerous conditions, which may exist even after removal of power, have abated. The AZM300 also offers adjustable latching which provides a holding force of 5 or 11 lbs. The AZM300 actuator includes a dampener pad so that the switch can be used as a door stop for small to medium sized guard doors.

The AZM300 also has an integrated RFID sensor to detect the target actuator and indicate a closed guard. This non-contact operating principle offers the option of individual coding, allowing a specific target actuator to be taught in during the first start-up. The I2 version allows the teach-in process to be repeated, allowing replacement of a lost or damaged actuator.

This electronic safety sensor has diagnostic advantages: Red, yellow, and green LEDs indicate various errors, misalignment and door open/closed signaling. For more advanced indication the AZM300 is also available with serial diagnostics to connect to various commercial PLCs. With continuous internal function tests and monitoring of the safety outputs, the AZM300 can be used in the highest level of machine safety circuits, PLe to ISO13849-1 and SIL 3 to IEC61508. They can be wired in series without detriment to safety levels.

The AZM300 housing is made of ECOLAB approved materials and is sealed to IP69K standards—a viable solution for use in hygienic or outdoor environments where high temperature and high pressure wash downs are typical.

www.schmersalusa.com 

www.schmersalusa.com/cms17/opencms/html/en/products/innovations.html?id=20  Schmersal



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.