EC: CX2000 Embedded PC

Hardware - Industrial PCs: Multi-core enabled embedded PC for high performance applications including advanced multi-axis machinery and powerful graphical user interfaces. This is a Control Engineering 2013 Engineers' Choice Award winner.

11/12/2012


Multi-core enabled embedded PC for high performance applications including advanced multi-axis machinery and powerful graphical user interfaces. This is a Control Engineering 2013 Engineers' Choice finalist.To increase industrial controller performance while increasing user flexibility, Beckhoff Automation has introduced the new CX2000 Embedded PC series. The CX2030 and CX2040 Embedded PCs implement powerful multi-core processors. With this impressive boost in performance, these embedded controllers cover performance areas previously reserved for larger, cabinet-mounted Industrial PCs including advanced multi-axis machinery and powerful graphical user interfaces. 

 

The multi-core enabled CX2000 represents the second generation of the Beckhoff Embedded PC family; the first generation has been very successful with over 150,000 shipped units. The new CX2000 devices are equipped with Intel processors from the second generation of the 32-nm series (Sandy Bridge). Power-saving Celeron variants are also available, making fanless options possible. The Embedded PCs operating systems benefit from the fast, integrated graphic core as well as faster DDR3 memory. The first three devices from the new CX2000 series include the following:  

 

1. CX2020 | 2nd Generation Intel Celeron @1.4 GHz, single-core 

 

2. CX2030 | 2nd Generation Intel Core i7 @1.5 GHz, dual-core 

 

3. CX2040 | 2nd Generation Intel Core i7 @2.1 GHz, quad-core  

 

The CX2000 housing concept combines a metallic basic housing with front panels made of a special screening plastic and can handle environments with temperatures ranging from -25 C to +60 C.  The basic CPU module from the new CX series always has one DVI port, four USB ports, and two independent Ethernet ports. A factory-configurable internal slot referred to as a "magic interface" can optionally perform the functions of an astoundingly wide range of interfaces. Fieldbus master and slave implementations are possible here, such as for EtherCAT (slave), Profinet, EtherNet/IP, Profibus, CANopen, and DeviceNet, as well as serial interfaces (RS232, RS422, and RS485). 

 

www.beckhoffautomation.com  

 

www.beckhoffautomation.com/cx2000  

 

Beckhoff Automation



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.