EC: Do-more H2 Series PLC

Machine and Embedded Control - PLCs: The Do-more Series PLC is the next generation programmable controller, with a powerful, intuitive set of new programming tools, built on a strong PLC foundation that makes control applications easier to implement. This is a Control Engineering 2013 Engineers' Choice Award winner.

11/12/2012


The Do-more Series PLC is the next generation programmable controller, with a powerful, intuitive set of new programming tools, built on a strong PLC foundation that makes control applications easier to implement. This is a Control Engineering 2013 Engineers' Choice finalist.The Do-more H2 series PLC is the next generation programmable controller built on a strong PLC foundation that makes control applications easier to implement. It's super fast and has lots of memory and embedded Ethernet.

The Do-more CPUs offer:

 

  • Free Do-more Designer software with powerful, new programming tools
  • More than 1 Mb total memory              
  • Program/monitor/debug over any embedded communication port.
  • Supports up to 256 I/O locally and thousands more with optional Ethernet remote expansion racks.
  • Supports inexpensive serial port expansion options for connection to bar code readers, ASCII devices, printers, etc.
  • Four base sizes with built-in power supply support 12/24 V dc, 110/220 V ac and 125 V dc (six and nine-slot only) power sources.
  • User-proven DirectLogic 205 hardware with over 50 option modules available, from discrete and analog to high-speed counter and Ethernet modules. 

Do-more CPUs can process up to 2,000 PID loops directly. Select from various control modes including automatic, manual, and cascade control; a wide variety of alarms includes process variable, rate of change, and deviation. Loop operation parameters (process variable, setpoint, setpoint limits, etc.) are stored in V-memory, allowing easy access from operator interfaces or human machine interfaces (HMIs).  The Do-more Designer PLC programming software provides easy-to-use setup menus; auto tuning reduces setup and maintenance time. The CPU uses the auto tuning feature to automatically determine near optimum loop settings. Do-more Designer can download a new version of your code into the Do-more CPU and seamlessly switch to it at the beginning of the very next scan, eliminating any pause that may wreak havoc on the operation of your machine or process. The Do-more CPUs are lightning fast (executing a 1 k Boolean program in just 0.2 ms) “about 20x faster than the DL205 processors” and for a fraction of the cost.

www.automationdirect.com

www.do-moreplcs.com

AutomationDirect



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.