EC: IndraControl L85 CNC Controller with Multi-core Processor

Machine and Embedded Control - CNCs, board-level products: The IndraControl L85 is a CNC controller with multi-core processor that establishes new levels of sophistication, performance and processing power for advanced multi-axes CNC applications. This is a Control Engineering 2013 Engineers' Choice Awards Honorable Mention.

11/12/2012


The IndraControl L85 is a CNC controller with multi-core processer that establishes new levels of sophistication, performance and processing power for advanced multi-axes CNC applications. This is a Control Engineering 2013 Engineers' Choice finalist.Enhancing productivity while reducing energy consumption, two key CNC operators requirements fully served by the advanced IndraControl L85 CNC controller. The IndraControl L85 is equipped with 16 MB SRAM and its multi-core processor has two 1.2 GHz CPU. The IndraControl L 85 multi-core processor was designed especially for machines with many axes and complex machining production processes that utilize multiple production technologies in a single work piece clamping.

Intelligent distribution of control sequences to the multi-core processor architecture delivers the added performance necessary to execute programs even faster. The control system reaches a CNC interpolation time that ranges from 0.25 ms to 1 ms, which decreases auxiliary process times and enhances productivity.  The IndraControl L85 controller has been designed to run the Rexroth IndraMotion MTX CNC advanced solution with integrated IEC 61131 PLC. The design of the IndraMotion MTX Runtime-system allows the execution of NC- and PLC-tasks in parallel, each on its own core of the processor -- enabling the performance of both systems (NC and PLC) to more than double.

The IndraControl L65 is equipped with an Ethernet field bus interface for multi-protocol operation, so manufacturers can choose between Profinet and Ethernet/IP. Depending on the specific system configuration, Sercos III, Profibus, Profinet, or EtherNet/IP can be configured to exchange data on the sensor-actuator level. Drive level communication is via Sercos III interface with Ethernet; so operators can control electrical and hydraulic motion with I/O and pneumatics, tightly synchronized with the interpolation update rate on a single bus.

The IndraMotion MTX platform also offers an optional energy monitoring module created to take advantage of the IndraControl L85's power. Operators can document the energy consumption of drive axes or ancillary units, even measure energy consumption per work piece.

www.boschrexroth-us.com

www.boschrexroth-us.com/country_units/america/united_states/en/Company/Press/press_releases/brc/Rexroth_MTXCNC_IMTS2012/index.jsp

Bosch Rexroth



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.