EC: IndraMotion MTX Micro CNC

Machine and Embedded Control - PACs - motion: Bosch Rexroth Corporation, IndraMotion MTX Micro CNC. The IndraMotion MTX Micro incorporates a PLC (IEC 61131-3) and all CNC controller and multi-drive (3 or 4 axes) hardware with a wide range of software functions for turning and milling machines in a very compact unit. This is a Control Engineering 2011 Engineers' Choice (EC) Honorable Mention.

11/01/2010


IndraMotion MTX Micro CNC - The IndraMotion MTX Micro incorporates a PLC (IEC 61131-3) and all CNC controller and multi-drive (3 or 4 axes) hardware with a wide range of software functions for turning and milling machines in a very compact unit. This is a Control Engineering 2011 Engineers' Choice (EC) nominee.Rexroth's IndraMotion MTX Micro is a compact CNC system solution for turning and milling machines. It lowers the time and cost required to build new machines by reducing components and introducing numerous predefined CNC functions. It incorporates a PLC (IEC 61131-3) and all controller and drive hardware with a wide range of software functions for turning and milling machines in a very compact unit.

Providing value with accuracies down to the nanometer, the IndraMotion MTX Micro is ideal for automating up to four feed drives for turning or milling machines as a CNC controller with a powerful integrated PLC. A built-in frequency converter function facilitates the use of standard asynchronous motors as a simple main drive system. Combined with spindle drives with positioning capability, the standard version of the control for turning machines offers C-axis function or C-axis function and powered tools.

A high-performance 32-bit processor provides for short CNC and PLC cycle times with high accuracy and productivity. The I/O interface with modular expansion capability integrates 24V DC auxiliary sensors and actuators into the automation setup eliminating the need for relays in most cases. Base models with three and four axes are available and can be expanded to a max of six axes, using Rexroth IndraDrive units connected via SERCOS III Ethernet, providing new possibilities for standard machine tools. User interface panels for milling and turning offer all standard functions that make it possible to commission and optimize without an external programming unit.

The compact controller hardware uses the same open CNC and PLC standards as the other controllers in Rexroth's IndraMotion MTX family. Systems data is stored using a compact flash (CF) module. The built in USB interface on the HMI panel can be used to import and export entire machine projects and NC data or to make back-ups.

www.boschrexroth-us.com

www.boschrexroth.com/country_units/america/united_states/en/products/brc/products/cnc_systems/index.jsp?searchQuery=IndraMotion

Bosch Rexroth Corporation

For more, see www.controleng.com/awards.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.