Efficiency, applied

A motor manufacturer, Baldor Electric Co., has been upgrading its offerings to comply with the Dec. 19, 2010, round of U.S. motor efficiency mandates. Baldor also is gaining efficiency in how it manufactures those motors as it integrates multiple acquisitions (including Dodge-Reliance). Control Engineering "Think Again," April 2010.

04/01/2010


Read more on motor efficiency and "lean" from Control Engineering .

 A motor manufacturer, Baldor Electric Co., has been upgrading its offerings to comply with the Dec. 19, 2010, round of U.S. motor efficiency mandates. Baldor also is gaining efficiency in how it manufactures those motors as it integrates multiple acquisitions (including Dodge-Reliance).

 

The next major deadline in the U.S. Energy Independence and Security Act of 2007 (EISA) is bearing down. Motors made prior to the Dec. 19 EISA deadline can still be sold and used in customer applications after the law goes into effect, Baldor says, though motors manufactured for use in the U.S., or entering the U.S. as a component of another piece of equipment, as of that date must comply with the new requirements. Baldor says machine builders and other original equipment manufacturers need to:

 

1. Adapt product designs appropriately for high-efficiency motors, which can be slightly larger, depending on the motor. Check with suppliers.

 

2. Educate customers that higher-efficiency motors cost 12-30% more initially but will lower overall ownership cost because of lower electricity use over time. Seek and plan for the new pricing information.

 

3. Get in line in a big hurry if systems designed with the new motors require recertification through listing agencies such as UL or CSA because of use of a different motor or because machine design needs to change to fit the more efficient (and slightly larger) motor.

 

In nearly parallel fashion, Baldor is improving its manufacturing processes after several acquisitions. Baldor continues to:

 

1. Implement lean manufacturing processes that eliminate waste and streamline workflows. In the Oshkosh, WI, generator plant, a rail line was just completed, allowing generators to roll to the workers instead of the workers going to the generators. In the Fort Smith, AR, plant, installation of a new highly integrated robotic motor coil winding cell is underway. Concrete has been removed in key locations for utilities and the footings to support the new equipment.

 

2. Teach and learn from employees , adapting best in class in efficiency. Baldor consults with operators about layout of production machines and related tools, workflow, and consistently evaluates equipment investments to get the most efficient mix of automation and manual operations.

 

3. Reorganize production locations by limiting number of frame sizes built at any facility, with a little redundancy, to ensure higher throughput and fewer errors, and some extra capacity as needed.

 

What efficiencies do you need to rethink and reapply?

 

ONLINE discussion, links
Please give the "Ask Control Engineering" blog your answers to either or both of these questions:
- What can you be doing to help your lean efforts flow more flexibly?
- Are you ready for the next EISA deadline? Why or why not?
Also read from Control Engineering :
- Motor efficiency requirements change in December 2010; are you ready?
- Acquisitions: Lean lessons learned ;


 

 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.