Electronic scrap recycling facility being built in Sweden

ABB is working with Boliden to build a plant at the electronic scrap recycling facility Rönnskär copper smelter in northern Sweden with the intent of tripling its recycling capacity. Metal recovery from scrap takes 10-15% of the energy required to refine metal from raw ore, the company said.

03/28/2012


Rönnskär is one of the world’s most efficient integrated copper smelters and metallurgical complexes. In 2011 it produced 219,000 metric tons of copper, as well as considerable quantities of lead, gold, silver, zinc clinker, sulfuric acid and liquid sulfuABB automation and power technologies are helping metals company Boliden create the world’s largest electronic scrap recycling facility – recovering copper and precious metals from electronic scrap using only a fraction of the energy required to extract metals from ore.

Boliden is currently ramping up a new plant adjacent to its existing electronic scrap recycling facility at the Rönnskär copper smelter in northern Sweden - an expansion that will almost triple recycling capacity from 45,000 metric tons to 120,000 metric tons a year, making it the largest e-scrap recycling facility in the world.

Rönnskär is an integrated metallurgical complex, which smelts and refines metals from mined copper concentrates and from recyclable materials like metal shred and electronic scrap. E-scrap comes from computers, mobile phones, circuit boards and other electronic equipment and contains metals such as copper, gold and silver.

The pre-sorted and pre-shredded e-scrap is smelted at Rönnskär using Boliden’s proprietary Kaldo furnace technology. After smelting, the molten metals are transferred to the adjoining production lines for processing into high-grade products.

Electronic scrap that is recycled at the Rönnskär plant in northern Sweden. Courtesy: BolidenIn 2010, e-scrap accounted for 6 percent of Rönnskär’s feed, with recyclable materials as a whole contributing 24 percent. When the new plant reaches full capacity in the second quarter of 2012, these figures will rise to 14 and 31 percent respectively, thus enabling Rönnskär to become less dependent on copper concentrates and more energy efficient.

Recovering metals from electronic scrap requires only 10-15 percent of the energy required to extract metals from ore. The process also supports the European Union’s Waste Electrical and Electronic Equipment (WEEE) Directive, which requires 4 kg of e-scrap to be collected and sorted per head of population in the EU. This is expected to rise to 13-16 kg per person by 2016.

ABB has played a significant role in the Kaldo plant expansion and at the Rönnskär complex as a whole. For the new Kaldo plant, ABB has supplied a comprehensive range of process-critical automation and power technologies, including the process control system.

The entire e-scrap recycling process is controlled by ABB’s 800xA Extended Automation System, and includes customized features such as remote operation of the process and an exact positioning system to prevent spilling of molten metal from the furnace.

Gold bars. Courtesy: BolidenThe System 800xA solution for the Kaldo plant expansion is integrated with Rönnskär’s existing System 800xA distributed control system, which controls the entire site and all its production processes. When ABB first installed the first ABB Advant automation system at Rönnskär in 1999, it was one of the largest plant control systems of all time, with more 50,000 input/output (I/O) points.

On the electrical side, the ABB solutions include low- and medium-voltage switchgear to ensure safe and reliable power distribution throughout the plant; low-voltage industrial drives to speed-control the motor applications and reduce energy consumption; and Resibloc dry-type distribution transformers, which are explosion-proof and environmentally friendly, and can withstand extreme loads and very high levels of mechanical stress and thermal shock.

ABB

www.abb.com 

Boliden

www.boliden.com 

- Edited by Chris Vavra, Control Engineering, www.controleng.com 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.