Electropneumatic controller series offers PID control

Emerson Process Management's Tescom ER5000 Series of electropneumatic controllers are a microprocessor-based PID controller designed to ensure desired pressure even as system process parameters change.

09/27/2013


Emerson Process Management's Tescom ER5000 Series of electropneumatic controllers are a microprocessor-based PID controller designed to ensure desired pressure even as system process parameters change. Courtesy: Emerson Process ManagementEmerson Process Management's Tescom ER5000 Series of electropneumatic controllers bring precise closed loop pressure control to a wide range of applications across industries. The ER5000 is a microprocessor-based PID (Proportional, Integral, Derivative) controller, providing localized control and automation with exceptional accuracy (0.1% FS) and rapid response time (25msec) to ensure desired pressure even as system process parameters change. Eliminating deficiencies of mechanical pressure regulators such as droop and decaying inlet effect, this easy step toward automation also reduces human error and fatigue, and provides for remote control and data acquisition capabilities.

The ER5000 can be used as a standalone unit to control the pressure of clean, dry inert gases from 0-100 psig / 0-6.9 bar, or be connected to any pneumatically actuated regulator or valve. Used with TESCOM regulators, the ER5000 provides pressure control of gases and liquids from vacuum to 30,000 psig / 2068 bar, with a Cv of up to 12+, and can be used in a wide range of applications across many industries including oil & gas, petrochemical & refining, aerospace, and industrial manufacturing & testing.

Designed exclusively for the ER5000, the ERTune software offers easy setup, tuning and operation. Save and download profiles, monitor and optimize system performance, leverage data acquisition and conditional control capabilities, set input / output signals, and easily troubleshoot with the automated diagnostic tests.

As a standalone controller or part of a distributed control system, ten configurations are offered to satisfy all levels of control and automation requirements.

Emerson Process Management

www.emersonprocess.com 

- See more Control Engineering PID and advanced control products.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.