Embedded Vision System supports PoE

PoE support reduces cabling complexity for M40 processor by eliminating the necessity for camera power cables; reducing costs, enhancing system reliability.

01/04/2011


PPT Vision - Embedded Vision SystemPPT VISION’s IMPACT M-Series Embedded Vision System features Power over Ethernet (PoE) support, delivering network reliability and significantly simplifying the installation and maintenance of networked devices. Using standard CAT 5 Ethernet cables, system cameras are powered from the embedded M40 processor—which eliminates the need for a separate computer for programming and processing and individual data and power cables. Limited cable wiring decreases installation and wiring expenses, while providing a more clear and safe workspace for operators and equipment. PoE allows for increased system flexibility with the ability to install virtually anywhere, allowing devices to be located at distances over 100 meters from a power supply.

Using uninterrupted power supply (UPS), PoE ensures the reliability and availability of the IMPACT M-Series cameras operating on the M40 processor. This combination facilitates continuous operation, eliminating power interruptions and costly system downtime.

“PoE support delivers a simple and reliable camera solution for the IMPACT M-Series Embedded Vision System,” said PPT VISION Chief Executive Officer Bob Heller. “Combining power and data into one cable allows for a scalable and flexible networking infrastructure, while providing significant time and cost savings.”

Delivering increased precision and speed to automated inspection, guidance and identification production processes, the IMPACT M-Series Embedded Vision System allows up to four M-Series Smart Cameras to perform independent asynchronously-triggered inspections. Utilizing the single M40 vision processor, the IMPACT M-Series eliminates the need to purchase and install multiple cameras—saving additional costs and reducing setup and networking time. The IMPACT M-Series benefits manufacturing industries ranging from electronics, pharmaceutical, and medical devices to consumer products and automotive. Typical applications include inspecting electronic connectors, correct part seating during die stamping, and detection of fill level and cap position on bottles.

http://www.pptvision.com/ PPT Vision



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.