End markets drive programmable logic controllers development in Southeast Asia

Oil and gas, automotive, and agriculture remain dominant for PLC sales in Southeast Asia with all three industries continuing to grow.

11/20/2013


Oil and gas, automotive and agriculture are among the major end markets for programmable logic controllers (PLC) in Southeast Asia, offering good growth prospects for the digital computers despite relatively small revenue, according to a new report entitled “PLCs – Southeast Asia – 2013 Edition” from IMS Research, now part of IHS (NYSE: IHS). 

The PLC market last year in Southeast Asia was less than $200 million to begin with, and the market also struggled because of continuing global economic difficulties,” said Alex Hong, senior analyst for the Electronics & Media service from IHS. “But while the machine-builder (OEM) space for PLCs is relatively weak, the end markets play a dominant role for PLCs in the region.”  

This year, the PLC market for Southeast Asia is forecast to amount to $146.5 million, up from $139.4 million. Growth this year marks a big improvement from last year’s 18 percent decline from $169.6 million in 2011, as shown in the attached figure. Starting in 2013, however, the PLC market for Southeast Asia will enjoy yearly growth in the range of 5 percent, with revenue amounting to $178.5 million by 2017.

Oil and gas, automotive and agriculture are among the major end markets for programmable logic controllers (PLC) in Southeast Asia, offering good growth prospects for the digital computers despite relatively small revenue. Courtesy: IMS Research

PLCs are generally deployed in electromechanical processes, such as factory automation or assembly lines. Microprocessors can be found in the machines, which must be able to withstand harsh environments like constant vibration or high noise levels. 

Among the most important end markets for PLCs in Southeast Asia is the oil & gas industry. Malaysia, for example, is famous for its palm oil, accounting for a significant portion of total global production. Here many mid-range and high-end PLCs are used in the large-volume production of palm oil, fed mostly by government investments. Meanwhile, large PLCs are used in the oil and natural gas industry in Indonesia, also a notable PLC market in the region. 

Another end market of significance for PLCs in Southeast Asia is the automotive industry. Thailand is world-famous in the production of automotive electronics, with industry requirements for PLCs increasing after the country was hit by severe flooding in 2011. Malaysia and Indonesia are also big automotive industry markets in the area especially in the case of the latter, where a very large population will soon demand more convenient modes of transport. 

A third vital end market is agriculture. Thailand and Indonesia are the largest contributors to this sector, and advanced PLCs will be required to produce innovative food processing and packaging components, targeted at local consumption and exports alike. 

Aside from the three industries above, other end markets for PLCs in Southeast Asia are those serving domestic demand, including water treatment as well as power and energy. 

Indonesia showed the strongest growth last year for the PLC market in Southeast Asia. In comparison, the more economically developed countries in the region—like Singapore, Malaysia and Thailand—were the most affected by the general decline of the global PLC trade. This year, however, all six distinct PLC markets—including Vietnam and the Philippines—are set for expansion. 

Outside of Southeast Asia, the Euro zone was particularly vulnerable last year following the travails of countries like Greece, Spain and Portugal, contributing to the overall woes of the PLC industry.

- Edited by CFE Media. See more controller-related research.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.