EPA methane emission methods questioned

Two Republican senators urged the Environmental Protection Agency (EPA) to reconsider its methods of calculating methane emissions from natural gas operations.

12/06/2013


Two Republican senators urged the U.S. Environmental Protection Agency (EPA) to reconsider its methods of calculating methane emissions from natural gas operations.

Sens. David Vitter (R-LA) and James Inhofe (R-OK) praised a report released in September that said some parts of the gas production process actually emit less methane than EPA estimated. The study also noted the leaks from pneumatic controllers involved higher methane emissions than EPA estimates, saying they need to do more study on the subject. The comments came during a hearing of a subcommittee on oversight of the Senate Committee on Environment and Public Works on Nov. 5 in Washington, DC.

The Environmental Defense Fund and nine gas operators funded the ongoing study, which measured actual emissions from 190 wells instead of relying on computer models as does the EPA.

A report outlining first-phase results of a University of Texas study concluded the methane emissions from operations associated with gas production overall is 10% less than the EPA estimates.

University of Texas chemical engineering professor David Allen and other researchers measured methane emissions from shale gas wells completed using hydraulic fracturing. Initial study results involved only the gas extraction phase, Allen testified at the subcommittee hearing.

EPA representative Sarah Durham told Vitter and Inhofe that she could not answer their questions yet about whether the UT study would alter EPA’s estimates or change EPA methods of estimating greenhouse gases. She would only say the EPA was reviewing and evaluating the study.

Durham, director of the Office of Atmospheric Programs within the EPA’s Office of Air and Radiation, also said she could not directly answer questions about the study’s impact on future GHG emission regulations, saying she was not associated with the regulatory branch of the EPA.

Other subcommittee witnesses included Mark K. Boling, general counsel for Southwestern Energy Co., and Darren Smith, environmental manager for Devon Energy Corp.

Smith said the UT study confirmed what Devon has been telling the EPA for some time.

“Immediate action is vital because the EPA estimates have been relied upon by researchers, financial analysts, and various policy makers as a basis for critical public policy considerations,” Smith said.

“In fact, a recently finalized EPA regulation on the oil and gas sector was justified using this inaccurate data,” Smith said. “Equally troubling, a group of Northeastern states is threatening to sue the EPA if it doesn’t propose additional emissions regulations on the sector, in light of the agency’s use of flawed data. EPA must immediately revise its data to more accurately reflect emissions associated with this source category, before further harm is done.”



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.