Erik Lince, among Control Engineering Leaders Under 40 for 2010

Want to meet the next generation of manufacturing automation and controls leaders? In November 2010, Control Engineering highlights 19 young professionals from around the globe who are making their marks in everything from system design to academia. These leaders aim to inspire others to get involved in engineering and resolve local and global challenges through smarter applications of automation and control technologies. Meet Erik Lince ...

11/15/2010


Erik Lince, Advanced Technologies Engineer, ThyssenKrupp System Engineering Inc., Control Engineering Leader Under 40, class of 2010Erik Lince, 28           

Advanced Technologies Engineer, 9 years

ThyssenKrupp System Engineering Inc.        

Auburn Hills, MI USA

www.thyssenkruppsystemengineeringinc.com     

Job function: System Integration or Consulting      

Academics: Lean Manufacturing, Delta College Computer Languages, Mott College Robot Programming, Valentine Robotics Rob-Cad Training, Siemens PLM Software Private Pilot, Wind Sock Aviation Commercial Pilot Training, Acker Aviation

Achievements: I worked in Mexico at our customer's facility for nearly one year with short breaks to come home to Michigan. We worked many 12-hour-plus days for seven days a week and finally achieved our end goal with success. The system was nearly 20% over the target cycle time; as a team we worked to achieve the intended cycle time and managed to keep our customer satisfied.    

Control Engineering Leader Under 40, class of 2010 logoNon-work hobbies: I took a vacation with my dad, brother in-law, and my brother in-law's best man. We went on a hiking trip for one week on Isle Royal and enjoyed being part of nature for a week. I did this because my dad and I are very close, and we needed a little father-son time before my wedding this fall. I am the president of our condominium association in Frankenmuth, Michigan. I am a private pilot and very involved at the Frankenmuth Airport, and I sit on the board of directors as an alternate board member.   

Engineering hobbies: I installed a new pair of amphibious floats on an airplane with the help of my father and a couple of friends. This was a pretty difficult task, but with a lot of planning and a great amount of attention to detail, everything worked out without any problems.           

Start in controls: I have always been interested in mechanical machines and when I began studying robotics, I was hooked. I began looking at jobs that other people do not want to do or were physically incapable of, and I tried to think of ways to implement a robot. After a while I found myself looking for a career in robotics and automation.

Return to main article: Control Engineering Leaders Under 40, class of 2010

- Compiled by Renee R. Bassett for Control Engineering.

See www.controleng.com/awards for other winners and other recognition programs for all ages.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.