Ethanol industry in for changes

Changes in tariffs and subsidies will bring greater availability of Ethanol fuel.

01/12/2012


With changes in the ethanol industry, your car may get a Brazilian, without getting waxed. Two things happened at the end of 2011: Subsidies for U.S. corn-based ethanol producers ended and tariffs that artificially raised the price of Brazilian ethanol were removed.

This means that corn-based ethanol produced domestically will have to compete on its own merits without a 45¢ per gallon boost that cost taxpayers on the order of $6 billion per year.

At the same time, ethanol imports from Brazil will most certainly increase. Using sugar cane as the feedstock rather than corn is cheaper, requires less energy in the production process, and requires less land. Brazil has reduced production levels in the last few years, but this could come back if exports to the U.S. are no longer suppressed by the tariff. At present, about 150 million tpy of the country’s total capacity of 700 million tpy of cane processing capacity is idle, so there is room to ramp up output fairly quickly.

As The Economist points out, Brazil has also done its own fiddling with domestic markets to keep the price of fuels artificially low, so producers should welcome a growing global commodity market for ethanol. This will be necessary for our needs since the Energy Independence Act of 2007 is pushing for higher use of ethanol that would be hard to produce domestically without further distortion of farm commodity markets.

When I see discussions of where the ethanol industry is headed in the context of energy policy, I am reminded of a talk I had with an agribusiness economist several years ago. He pointed out that much of the ethanol industry as we know it, grew out of a simple desire by farmers to have something useful and profitable to do with excess corn inventory. From there it got a whole lot more complicated. Now producers may want to take another look at that question.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.