Ethernet market growing in Asia Pacific region

According to IMS Research, the adoption of Ethernet in the Asia Pacific region is growing faster than in either EMEA or the Americas. Worldwide, Ethernet-based technologies will account for over 26% of all new networked nodes connected in industry in 2015.

01/25/2012


IMS Research LogoUse of Ethernet-based technologies in industrial communications will grow faster than use of fieldbus, especially in the Asia-Pacific region; according to a new report from IMS Research. This is largely driven by the need to improve efficiency as currency and wage pressures sound warning bells, threatening the cost advantage that has fueled the meteoric growth of manufacturing in the region.

The report was compiled from data collected during the second half of 2011, including input from the many specialist industrial reports published by IMS Research. Overall, 16 industrial product types were analysed for networking connectivity, with many segmentations, including by region: EMEA, Americas and Asia Pacific. The worldwide growth in the installation of new Ethernet based nodes was forecast to be 13% CAGR from 2010 to 2015; regional growth rates were 11% in EMEA, 10.4% in the Americas, 18.6% in Asia Pacific.

“The faster growth in the Asia Pacific region is not unexpected”, commented John Morse, the senior analyst who wrote the report, “However, the rate of growth seems to be gathering pace in the recovery from the 2008/9 recession”. Morse noted that the competitive advantage countries in the region have enjoyed for decades was under threat by saying, “The Asia-Pacific growth rate is high despite the pressure on local manufacturing costs from increasing wages in the growing economies of Asia, most notably China. In addition, the demand for products from both America and Europe is currently slowing, adding an additional threat to the economies of scale needed to maintain profitability. I am aware of some Western companies that are considering bringing manufacturing facilities back home, citing that the cost advantages of outsourcing have been substantially reduced in recent times.”

Morse added, “The market in Japan is somewhat different and has been much slower to adopt Ethernet-based communication technologies in industry. Even there, this is changing with the introduction of CC-Link IE, a Gigabit technology form Mitsubishi Electric; and with extensive promotion by other organizations including ODVA and Profibus International promoting Ethernet/IP and PROFINET respectively."

IMS Research

www.imsresearch.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.