European charging station standards a welcome move

The European automobile manufacturers' trade association (ACEA) recommended one plug/connector for all electric vehicles and plug-in hybrids regardless of the OEM.

09/28/2011


The European automobile manufacturers’ trade association (ACEA) announced last Thursday (Sept. 22, 2011) that it has defined a set of recommendations to standardize the charging of electric vehicles. This would mean one plug/connector for all electric vehicles and plug-in hybrids regardless of the OEM.     

This is a welcome initiative which addresses one of the biggest issues hampering the future of electric vehicles: the lack of standardization. The lack of one, ‘true’ standard has so far resulted in the development of at least three ‘standards’ running in parallel worldwide for charging stations and connectors, whilst the charging equipment existing electric vehicles come with literally varies from OEM to OEM. The current sentiment is that the opportunity to work on a joint venture to standardise chargers and connectors has gone and passed. This announcement from the ACEA is therefore welcome news.

Naturally, one main question remains: Will this announcement actually mean that we will see a standardisation as, after all, this is only a recommendation? With millions already spent on research and development for current solutions, it is unlikely that OEMs will be happy to see their efforts being discarded after just one announcement. The difference here, and the reason why this initiative can be successful, is that the recommendations have not been put together by politicians far removed from the automotive industry, but in a joint effort by all major OEMs in Europe. Having the OEMs on board is key to driving this standard forward.

Despite all of the above, the ACEA does not anticipate full implementation for at least another vehicle cycle, aiming for MY 2017 (when IMS Research forecasts that 7.8% of all vehicle production will be some type of EV). This means that the mix of current approaches will continue for some time, frustrating OEMs and consumers alike.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.