FDT Technology standard approved by ISA 103 committee

FDT standard can now be integrated globally

10/06/2010


FDT Technology, a previously approved international standard (IEC 62453), has been approved by the ISA103 committee and is now pending as an International Society of Automation (ISA) and American National Standards Institute (ANSI) standard. Once approved, the value proposition of FDT that enables any fieldbus, device or sub‐system specific software tool to be integrated as part of a universal life‐cycle management tool for the American marketplace will be validated by two independent sources.

The ISA103 Field Device Tool Interface Committee was formed in 2006 to consider the adoption of FDT Technology as an ISA Standard. In May 2009, ISA 103 committee efforts were accelerated when FDT Technology was unanimously accepted by the International Electrotechnical Commission as IEC 62453. Since that time, the ISA103 committee worked to make the approved international standard available for approval by both the ISA and ANSI.

Will Chin, Research Director, ARC Advisory Group commented, “With formal IEC, ISA, and ANSI approvals, users can deploy standard FDT Technology globally and expect seamless integration of asset information that can be freely distributed between the plants without custom intervention.”

Chaired by Ian Verhappen, the ISA103 committee represents a cross section of industrial automation industry professionals including users, designers, implementers, educators and suppliers of leading industrial automation technology. The committee worked together to adopt the full suite of FDT standards as ISA‐103.00.01 through ISA‐103.00.09.

“The team could not have picked a better time to approve standardization efforts with the large number of projects that are being planned to enhance productivity while reducing integration costs,” says Verhappen. As a result of this effort, end users will have the freedom to choose best in class FDT based products allowing engineers access to their smart instruments in a rich graphical environment including tools that will allow users to make better use of diagnostic information, improve ability to perform maintenance and much more.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.