First order for Siemens’ 60-Hz, H-class gas turbine

H-class industrial gas turbines—the largest and newest of these machines in production—are currently in the spotlight. They promise remarkable 60+% thermal efficiency for combined-cycle gas turbine (CCGT) power plants by incorporating advanced electromechanical and thermal design and use of the latest materials.

11/01/2010


Siemens Energy is completing a monumental, 10-year development program of its H-class gas turbine system. The commercialization process first focused on development of an internally air-cooled 50-Hz turbine (SGT5-8000H), but market needs for a 60-Hz version were also part of the product plan early on.

Design of the 60-Hz turbine system (SGT6-8000H) was scaled from the 50-Hz turbine, using input from the extensive test and validation program conducted on the latter machine at a working gas power plant—Irsching 4, near Ingolstadt, Germany (see main article). The testing program included more than 1,500 hours of turbine operation in simple-cycle mode, 1,200 of which occurred at full-load, and over 200 starts. “Harmonized design features of the turbines allow validation experience to be transferred from 50- to 60-Hz products,” said Phillip Ratliff, director of next-generation gas turbines at Siemens.

The 60-Hz turbine is rated at 274 MW output at ISO conditions (simple-cycle operation) compared to 375 MW output for the 50-Hz machine. In combined-cycle operation, these turbines are rated at 410 MW and 530 MW, respectively, while achieving over 60% efficiency, according to the company. Among attributes of these gas turbines, Ratliff cited fast start-up and cycling capability to support intermediate- to continuous-duty operation; and ability to run on gas and fuel oil, with engine emissions at 25 ppm NOx and 10 ppm CO.

Control Engineering has visited Siemens’ H-turbine test and validation site at Irsching 4. Discussions with Willibald Fischer, Siemens’ program manager for H-turbines, included the development of the 60-Hz turbine. Fischer explained that 60-Hz machines enjoy certain inherent advantages over their 50-Hz cousins, for example, smaller physical size because of higher synchronous speed. This translates to cost savings in materials and manufacturing. “It also makes possible rail transport, which simplifies delivery,” said Fischer. “A 60-Hz turbine also saves on the number of combustor cans needed—12 versus 16 compared to a 50-Hz machine.”

First sales order

Announced in mid-June 2010, Siemens Energy Inc. has received an order from Florida Power & Light Co. (FPL) for six 60-Hz, H-class gas turbine-generator packages. The SGT6-8000H gas turbines will be used to modernize FPL’s Riviera Beach and Cape Canaveral Next Generation Clean Energy Centers in Florida. They will help double the output of these power plants, while reducing CO2 emissions by 50%, according to Siemens.

Three SGT6-8000H turbines will go to each power plant, replacing outdated gas- and oil-fired units. Modernization work has begun at the Cape Canaveral plant and is expected to start in late 2010 at the Riviera plant, with return to service for these plants expected in 2013 and 2014, respectively.


Frank J. Bartos, PE, is a Control Engineering contributing content specialist. Reach him at braunbart@sbcglobal.net.

 


For more information, visit

www.energy.siemens.com

Also from Control Engineering, read:

- Siemens’ 60-Hz, H-class turbine

 

- Largest gas turbine: 2,838 sensors, 90 GB data per hour of testing

- The hunt for 60+% thermal efficiency

- New, efficient industrial turbines coming



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.