Flowmeters – A closer look at the numbers

IMS Research forecasts coriolis flowmeters to overtake differential pressure (DP) flowmeters as the largest flowmeter market in 2014, having replaced magnetic flowmeters as the second largest market in 2012.

11/28/2011


For the purposes of this discussion, revenues made from both the primary element and differential pressure transmitter have been considered in the numbers relating to DP.

This is a bold statement and has certainly generated a lot of talk. It seems everyone has an opinion on the flowmeter industry but opinions vary based on the country and industry in which the individual represents. With that said, the below summarizes my view.

While the market for coriolis flowmeters is forecast to be larger than that of DP and electromagnetic in 2014, this is only reflective of the global market in terms of dollar revenues. In the Americas, revenues for DP are forecast to remain larger than those of coriolis through 2015. While in EMEA, coriolis revenues have already surpassed those of DP. Also, revenues only form part of the picture. This was illustrated by one of my peers, who kindly pointed out that analyzing the market this way was similar to comparing a Buggati Veyron with a mid-range Ford.

With this being the case, unit shipments can also tell a different story. In 2014, IMS Research forecasts over 430,000 DP flowmeters to be shipped globally versus less than 170,000 coriolis. With that said, coriolis flowmeters represent a much smaller portion of the market than dollar ($) revenues reflect.

The replacement of mechanical technologies does not imply that mechanical and differential flowmeters do not offer a valued solution in the market. Their low cost, familiarity, range, and ease of calibration ensures they will have a role to play in the market for quite some time. Again, that role will certainly be dependent on the individual application.

Despite being the largest market in dollar revenues or unit shipments, I’ll leave you to decide the outcome. Both coriolis and DP face competition from other flowmeter technologies and are subsequently used to varying degrees, by application. Accounting for nearly a quarter of global flowmeter revenues, the oil and gas industry is the largest segment of the flowmeter industry. It is also home to several flowmeter technologies. While much of the talk surrounds coriolis, ultrasonic and DP flowmeters, the industry is also starting to look at vortex flowmeters, primarily in refineries. Furthermore, with enhanced oil recovery techniques, like water injection, electromagnetic flowmeter use is also finding traction in the oil and gas sector. 



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.