Ford to start $773 million plant expansion in Michigan in 2013

Six facilities to get new equipment, technology; 2,350 jobs created

12/28/2012


Ford Motor Company is spending more than $773 million on new equipment and capacity expansions across six manufacturing facilities in southeast Michigan as it delivers on a commitment to invest $6.2 billion in U.S. plants by 2015. Courtesy: Ford Motor ComFord Motor Company is spending more than $773 million on new equipment and capacity expansions across six manufacturing facilities in southeast Michigan as it delivers on a commitment to invest $6.2 billion in U.S. plants by 2015.

The investments in Michigan will create 2,350 new hourly jobs and allow the company to retain an additional 3,240 hourly jobs. The 2,350 new positions are part of the 12,000 hourly jobs that Ford is adding across the U.S. by 2015.

“Even as we wrap up an incredibly busy year of capacity expansions and product launches, we are continuing to look to the future,” said Jim Tetreault, Ford vice president of North America Manufacturing. “These investments, many of which are already under way, will ensure our southeast Michigan manufacturing facilities can support our aggressive growth plans.”

Expansion work at several plants started earlier this year to increase Ford’s capacity to provide transmissions and axles to support growing demand for fuel efficient vehicles and F-Series pickup trucks.

In addition, over the next six months Ford will bring a new stamping press on line at Michigan Assembly Plant; install equipment for four new stamping presses at Dearborn Stamping Plant; and finish expansion work at Flat Rock Assembly Plant to produce the new Fusion next year.

Specifically, Ford is making investments at the following locations: 

  • Michigan Assembly Plant - $59.4 million for stamping press line expansion
  • Dearborn Stamping Plant -$305 million for plant modernization, new press lines, scrap conveyor system and other machinery and equipment
  • Flat Rock Assembly - $161 million for machinery and equipment to assemble the new Ford Fusion and as an additional production facility
  • Sterling Axle Plant - $86 million for machinery and equipment investment to meet axle demand increase and future model changes
  • Van Dyke Transmission - $87.7 million for machinery and equipment investment to meet capacity expansions for 6F35 and 6F50 transmissions
  • Livonia Transmission - $74.7 million for machinery and equipment investment for transmission expansion and test equipment 

Source: Ford Motor Company.



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.