Gas detectors help with drug tablet coating thickness

Sensitive detectors, from Minneapolis-based Sensor Electronics, monitor ethanol gas concentrations in the exhaust streaming from the coating machine.

09/26/2011


Gas detector (white) looks for leaks inside the cabinet holding the mechanical system operating the sprayer and tumbler. Besides showing actual ethanol levels in LEL percentage, the detector has LEDs that glow green/amber/red, reflecting any increase in ethanol intensity. Courtesy: Sensor ElectronicsSophisticated gas detectors help a pharmaceutical manufacturer, Paddock Laboratories, measure coating thicknesses on drug tablets. The sensitive detectors, from Minneapolis-based Sensor Electronics, monitor ethanol gas concentrations in the exhaust streaming from the coating machine.

While the detectors protect plant personnel, said John Levasseaur, production engineer, Paddock Laboratories, using them to monitor coating thickness is especially intriguing.

Technical engineer John Levasseur inspects mounting for spray head feeding ethanol-based tablet coatings. Duct opening (lower left) carries exhaust gases. Courtesy: Sensor ElectronicsTablet bases are fed into a twirling tumbler where a small-bore feeder sprays a bonding mist of the ethanol carrier, plus a color tint, a lubricant (for easier swallowing), or the drug itself. Depending on the coating, the tablets are tumbled from 30 minutes up to 4 hours, with close monitoring of the ethanol feed, temperature, and humidity.

The ethanol concentration in the exhaust is directly proportional to the coating thickness on the tablets. A too-high ethanol level means a too-thick coating, so the spray mist ratio is decreased. The ethanol proportion in the exhaust then verifies the feeder setting.

Tablet-filled basket tumbles inside stainless-steel housing; ethanol gas carries tin/lubricant/drug coating feeding through arm extending into basket. Depending on coating, tumbling times range from 30 minutes to 4 hours. Courtesy: Sensor ElectronicsThe gas detectors do double duty. Ethanol is explosive, so if ethanol levels in the exhaust duct reach a preset LEL (lower explosion limit), then the detector triggers alarms to warn workers. If the ethanol concentration continues to rise, the gas detection system turns on fans to flood the area with outside air.

Paddock Laboratories concentrates on niche markets for generic drugs. “But with any generic drug—or any drug, for that matter—reliability is the key. Closely monitoring ethanol levels in our coating process helps us maintain that reliability,” Levasseaur said.

- Tom Probst, corporate communications, Sensor Electronics Corp.

www.sensorelectronics.com



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Big plans for small nuclear reactors: Simpler, safer control designs; Smarter manufacturing; Industrial cloud; Mobile HMI; Controls convergence
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.