Gatlinburg sewage plant not up to specs

The Gatlinburg Wastewater Sewage Plant basin that failed recently leaving two dead did not follow exact design specifications, a forensic engineer said Monday.

04/26/2011


The Gatlinburg Wastewater Sewage Plant basin that failed last week leaving two dead did not follow exact design specifications, a forensic engineer said Monday.

Working from a design by the former Flynt Engineering of Knoxville in 1996, North Carolina-based Crowder Construction did not follow initial plans to a T, said Hal Deatherage, a partner with Construction Engineering Consultants, an independent firm hired to determine why the basin’s wall collapsed April 5.

Veolia Water North America, the company that runs the plant owned by the city of Gatlinburg, gave Construction Engineering Consultants the basin’s initial design plans Friday when they had their first on-site meeting at the Banner Road facility, Deatherage said.

“I am certain there is one area I was concerned about on Friday that does not conform to the initial design,” Deatherage said.

He declined to be more specific, citing the ongoing investigation.

Charlotte, NC-based Crowder Construction Company builds municipal and industrial water and wastewater treatment facilities throughout the Southeast.

Deatherage who returned to the site Monday with his team to sample the fallen basin wall, said he told city of Gatlinburg officials it could take a month before his firm can determine what caused the basin to fail.

When the basin failed the morning of April 5 after a night of heavy rain, Veolia Water North America employees John Eslinger, 53, and Don Storey, 44, died after the basin wall collapsed and more than 2 million gallons of untreated sewage poured into the nearby West Prong of the Little Pigeon River. Officials cut off power to the plant after the wall crumbled, but they restored it the following night.

One day later, on April 7, city officials announced sewage was no longer going directly into the river untreated.

A Tennessee Department of Environment and Conservation lab report released Monday showed water samples collected from the Little Pigeon River on Friday met water quality standards for recreation.

Samples collected two days earlier, on April 6, indicated high bacteria levels based upon “fecal coliform results,” the report reads.

“The restoration of operations at the wastewater treatment plant helped to improve water quality in a very short duration. However, TDEC wishes to maintain the water quality advisories issued last week as a precautionary measure. It should be noted that the affected waters have been posted against body contact recreation annually during the summer months since 1993. Additional sampling is planned.”



No comments
The Engineers' Choice Awards highlight some of the best new control, instrumentation and automation products as chosen by...
Each year, a panel of Control Engineering editors and industry expert judges select the System Integrator of the Year Award winners.
Control Engineering Leaders Under 40 identifies and gives recognition to young engineers who...
Learn more about methods used to ensure that the integration between the safety system and the process control...
Adding industrial toughness and reliability to Ethernet eGuide
Technological advances like multiple-in-multiple-out (MIMO) transmitting and receiving
Virtualization advice: 4 ways splitting servers can help manufacturing; Efficient motion controls; Fill the brain drain; Learn from the HART Plant of the Year
Two sides to process safety: Combining human and technical factors in your program; Preparing HMI graphics for migrations; Mechatronics and safety; Engineers' Choice Awards
Detecting security breaches: Forensic invenstigations depend on knowing your networks inside and out; Wireless workers; Opening robotic control; Product exclusive: Robust encoders
The Ask Control Engineering blog covers all aspects of automation, including motors, drives, sensors, motion control, machine control, and embedded systems.
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
News and comments from Control Engineering process industries editor, Peter Welander.
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
This is a blog from the trenches – written by engineers who are implementing and upgrading control systems every day across every industry.
Anthony Baker is a fictitious aggregation of experts from Callisto Integration, providing manufacturing consulting and systems integration.
Integrator Guide

Integrator Guide

Search the online Automation Integrator Guide
 

Create New Listing

Visit the System Integrators page to view past winners of Control Engineering's System Integrator of the Year Award and learn how to enter the competition. You will also find more information on system integrators and Control System Integrators Association.

Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Control Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.